What if the wifi is not connected to the public?

  
Universal wifi is a free wifi hardware product launched by Tencent. In most cases, it can be used normally, but it will inevitably appear that the wifi cannot be connected and the creation fails. Usually it is due to the lack of system services. Due to network restrictions, a few campus network client restrictions and other issues, the national wifi siege division is actively working to solve these problems, the following brings the official release of the solution. What if the wifi is not connected to the public? The latest method summary: 1, win 7 system solution: a) right click on the computer & mdash; management & mdash; services and applications & mdash; service - Internet Connection Sharing (ICS) b) right click on the service, select start, if prompted &ldquo Unable to start, dependent service XXXXX”, refer to the method in the following link to fix, http://axiu.me/network/vpn_in_win7/and set the service to start automatically, set the method to start automatically as follows c) Right click The service, select properties, start type selection & ldquo; & rdquo; 2, XP system solution: a) start & mdash; run & mdash; enter services.msc, enter b) find Windows Firewall /Internet Connection Sharing (ICS), right click “Restart”c) Right click on the service, select Properties, Start Type Select “Auto”. d) After the service starts normally, re-plug the device to see if it is normal; if the service cannot start normally, please contact us in time. e) If the control panel — network and Internet sharing & mdash; network connection appears as shown below icon, and Unicom usb ~ adsl icon 3, the mobile phone has always been displayed to obtain an IP solution: a) download the latest version b) turn off the system firewall c Close the computer housekeeper firewall If the above has not been resolved, please manually set the static ip try, the specific method is as follows: a) Start & mdash; run & mdash; enter cmd, enter b) Enter ipconfig to enter, as shown below c) The ip in the setting is static ip, check the wireless network ip is 192.168.1.1, then the ip in the mobile phone is set to 192.168.1.100; if the wireless network ip is 192.168.0.1, the ip in the mobile phone is set to 192.168.0.100, the specific setting As follows: d) mobile & mdash; set — WLAN settings, long press the created wifi, select modify network e) select “ display advanced options & &quo; & mdash; IP settings & mdash; static f) Enter the IP address: 192.168.0.100 or 192.168 .1.100 gateway: 192.168.0.1 or 192.168.1.1 domain name: 8.8.8.8 save this article from [system home] www.xp85.com
Copyright © Windows knowledge All Rights Reserved