Apple iOS6 official version jailbreak tool and jailbreak tutorial

iOS6 jailbreak first step: start jailbreak tool red snow to complete all the above preparations, will download the redsn0w 0.9.15 dev4 green version _ red snow perfect jailbreak tool iOS5.1 jailbreak tool unzip, double click on the " ;RedSn0w.exe” The file starts the jailbreak program, and the iTunes that has been opened will be automatically closed. 2013 latest rainforest wood wind xp system download: rain forest wood wind GHOST WIN7/XP (two in one) 2013 Heian version double click redsn0w.exe If it is under Win7 or Win8 system, you need to right click on redsn0w.exe, then select &ldquo ;Run as administrator”. In Win7 and Win8 systems, you need to run the “Other” button on the click interface as an administrator to enter the settings interface. Enter the settings interface in the settings interface, click the “IPSW Select” button to load the iOS6 firmware file. Load the IPSW firmware package and see the “Identify Success” prompt, click “OK” to close the prompt and return to the main RedSn0w interface. After the firmware identification is successfully returned to the main interface, click the <;Jailbreak" button.

iOS6 jailbreak second step: choose to install Because Cydia does not currently support iOS6, so you can not install Cydia for iOS6 jailbreak, you can only choose Install SSH (install SSH). Check the installation of SSH. Next RedSn0w will prompt us to connect the device to the computer with the data cable, and turn off the power, ready to enter DFU mode. The prompt message before entering the DFU mode is found during the actual jailbreaking process. Even in the power-on state, according to the following prompt operation, the DFU mode can also be entered and the jailbreak can be completed. It doesn't matter if you don't successfully enter DFU mode, just follow the prompts and re-operate.

The third step of iOS6 jailbreak: starting jailbreak manually entering DFU mode needs to be realized by combining ammonium keys. It may be difficult for novices. Don't be anxious, strictly follow the order and time in the prompts, try more. It can be successful several times. Press the key combination to enter the DFU mode combination key step: (1) press and hold the power button (power on key) for 3 seconds; (2) keep holding down the power button and do not release, while holding down the home button (main screen button) for 10 seconds; 3) Release the power button, keep pressing the home button and do not release it.

If the combination key is not properly operated and fails to enter DFU mode, Red Snow will pop up the prompt of DFU mode failure. If the jailbreak novice masters bad time during the initial operation, it may be unsuccessful. Just follow the prompts and try several times. After successfully entering DFU mode, Red Snow will automatically start jailbreaking, then we can release the home button and wait for it to complete the operation. Automatically start jailbreaking When the red snow shows "Done", it means that the jailbreak operation on the computer side has been completed, and the red snow can be closed. Jailbreak completion tips: Here is a little trick to share with everyone, if you are in the boot state of the combined button operation, you can successfully enter the DFU mode without looking at the hints in the red snow. The first step is also to hold down the power button until the shutdown prompt appears on the screen. Shutdown prompts Do not release the power button at this time, and press and hold the home button at the same time. After the screen is completely black, release the power button and continue to press the home button until the red snow begins to escape. iOS6 jailbreak is completed: After waiting for the device to restart and jailbreak, the device may have a short black screen, followed by a long string of code scrolling. The code scrolling during the jailbreak is finally the classic LOGO of Red Snow: running pineapple, this process will last a little longer, usually around 3-5 minutes. We don't need to do anything in the whole process of running pineapple LOGO during jailbreak, and wait patiently for it to complete automatically. However, if the device stays in an interface for more than 5 minutes and there is no change during the period, it may be that the jailbreak is unsuccessful and you don't have to be nervous. You can do it again by following the above steps. At this point, iOS6 jailbreak is complete. Finally, you need to remind everyone that jailbreaking is risky and you need to be cautious! Especially in the warranty period of the National Bank iPhone, iPad or iPod iTouch, after the jailbreak will no longer enjoy the warranty service! 2013 latest computer company xp system download: computer company GhostXP_SP3 speed installed version 2013-02 other systems: Apple Brush Assistant v1.28 (iPhone Brush software)