Protel uses tips

Protel is the most widely used EDA software in circuit design and manufacturing. In the standardized design management, the design file design must comply with the corresponding national standards, such as "Electronic Product Drawing Rules", "Design Document Management Drawing" and "Printed Board Drawing", etc. Since Protel software is foreign software, it cannot be directly Print out the drawings that conform to the national standards. The common way to standardize the drawings is to set the set, that is, first put the table and Chinese characters that meet the national standards on the paper, then put the paper into the printer, and print the board with Protel. Print on it to form a document that meets the criteria, but this is inefficient, and the graphics are often biased and sometimes reversed. The following describes an easy way to convert a printed board diagram into an AUTOCAD format and then print out the standard-compliant drawings in AUTOCAD at one time. PCB files can be exported to DXF format in Protel, while AUTO-CAD can import DXF files so that Protel PCB files can be read by AUTOCAD. The detailed operation process is as follows: First, export the PCB file to be converted into a DXF file in Protel, then run AUTOCAD, import the DXF file, save it as a DWG file, and then open the formatted design file format that conforms to the national standard. Table, paste the graphic into the table and move it to the appropriate location. This allows the required printed board drawings to be printed in accordance with national standard design file formats.