1. I thought that adding a network printer should be as convenient as win7. Under Control Panel, select <Hardware & Sound>, select <Devices & Printers> in the pop-up page, select Add Device, and the system will start automatically. Find the connected printer hardware
2. Because it is a network printer, select the printer I need below to download the interrupt auto search. As shown in the figure below, the system pops up the manual selection interface and selects the third line < Use the tcpip address or host name to add the printer> checkbox before the option
3. After entering the next step, enter the address of the M1213 network printer in the space behind the host name or IP address. It is not clear. Can find the person who installed the printer to understand, in win7 to this step is OK, the computer will automatically install the driver with the printer interaction, but win10 unfortunately can not find the driver, you need to manually specify the driver.
4, you need to download the driver yourself, enter the printer's official website, select the service and support - driver download, then select the printer driver download, as shown below, type the printer model in the space on the right, select search, search After the result comes out, select the laser jet 1213nf multi-function printer
5, the system will automatically detect the current computer's operating system, and then choose to display the corresponding driver, as shown below is a version 5.0, is a 200M driver, released Time is 2015, content and drivers and some installation videos, unfortunately can not download pure drivers.
6, Xiaobian download to 95% very quickly, the last 5% took a long time, and does not seem to support the breakpoint resume, if you choose to pause, you must re-download, it is recommended to drive the website in China Download, then install the driver, double-click the downloaded driver file to enter the automatic decompression.
7, click setup to start the installation, select the advanced installation after the interface, save a bunch of unwanted software, remove the check box to join the customer feedback plan, the other use the default value, to the printer connection step , choose to configure to print through the network
8, the following system will start to automatically install the driver, about 5 minutes or so can be completely installed, after the installation is completed, there will be a prompt to identify the printer to be installed, as shown below Show, select the second line to install the printer by address
9, in the address filling page, select the second line of IPV4 address, and then enter the address of the network printer in the space behind, which is the IP of step 2; If you know the MAC, you can also select the first line of hardware address input, so even if the printer changes the IP is not affected
10, according to the IP or MAC provided in the previous step, the system will automatically find the printer, find the corresponding Before the hardware will prompt whether to install, select Y to proceed to the next step. After the system will copy some files to windows, it will be installed. You can try a test page first.
11. Because the device is a three-in-one device, it supports fax and copy functions. Therefore, after installing the printer driver, you will be prompted whether to perform fax-related settings. Small series is not required. Select Cancel to exit. If necessary, you can proceed to the next fax-related configuration.