Win10 32-bit system to play DNF can not run and blue screen solution

  

Win10 32-bit system to play DNF blue screen how to solve:
1, 0X0000000A
is the driver and software conflict caused by · if your machine blue screen, and each time this code please think I wonder if I have updated the software or what driver, please uninstall it and look at it. Under normal circumstances, it can be solved. If you can't think of it and it is very frequent, then there is no way to re-do the system. If this is not only the code, restart the blue screen will also appear 8E, 7E, 50, D1, 24 and other code, then first consider memory damage.
2, 0X0000007B
This code is related to the hard disk, but don't be afraid, it is not bad, it is the hard disk boot partition error caused by setting the problem or virus. If you are having problems installing the system with the original system disk, then your machine configuration is relatively new. As an old system disk, you don't recognize such a new hard disk interface, so you have to enter the BIOS to change the hard disk mode to IDE. Compatibility mode. Of course, now people use the ghost version of the operating system, the newer ghost disk does not exist this problem. People can't find the IDE problem, because many motherboards indicate that the wording is not the same. Some write AHCI and Compatibility. This AHCI is equal to SATA mode, and Compatibility is equivalent to IDE mode. If your operating system has been used for a while, and suddenly this problem occurs one day, then sorry, caused by the virus, press F8, select the last correct configuration, and return to the normal mode, then please re-do the system.
Three, 0X000000ED
This fault has a relationship with the hard disk, the system probability is relatively large, and the probability of the hard disk being really bad is relatively small. I have gotten no less than twenty blue screen machines of this code, and only one of them is really bad. All that's left is a problem with the rollout, and it's one of the few blue-screen codes that can be fixed. The repair method is to find the original system installation disk (or the golden finger V6 that pe startup interface with the console repair). Here to use the system disk method, put the system disk into the CD-ROM drive, boot to the installation interface, choose to press R to enter the console repair, enter the console will appear prompt C: /everyone enter chkdsk -r here and then it will Automatically detect and fix the problem. After the repair is completed, restart the computer and you can enter the system. After entering the system, it is best to kill the virus first, then restart it and try it again. If it is normal, then there is no problem. If this code is still available, That means the hard disk has a problem, need to be replaced, or separate the problematic area, make a hidden partition, use the space behind to install the system.
four, 0X0000007E, 0X0000008E
These two codes are mostly caused by viruses, antivirus can be. If the normal mode cannot be entered, you can press F8 to enter the safe mode. Of course, it may be caused by memory. You can try to re-plug the memory. Generally, the memory damage probability of this code is not large.
5, 0X00000050
Hardware failure, the possibility of hard disk is very large. If there is a code like 0A, 7E, 8E after 50 restarts, then the memory is broken. If you get this code every time, first try a hard drive to test whether the machine can start normally. If the test hard disk is ok, try the memory again, if the memory has been tried, change the CPU. In short, this must be a hardware failure.
6, 0X000000D1
This code is generally related to the graphics card, there may be damage to the graphics card, or it may be caused by the installation of a less compatible graphics card driver. It is recommended to find a friend to borrow a graphics card. Try it on, or if the host has an integrated graphics card, try it with an integrated graphics card. If there is no flower screen in normal times, then try to replace the graphics card driver that comes with the machine.
Seven, coooo21a C at the beginning of the fault
It reported the fault is very evil, reported unknown hardware failure, but the code at the beginning of this type of C is mostly independent of the hardware. Basically, some drivers that start at the same time with the system! Or the service problem, for example, once I changed the F disk of a notebook to the E disk, and then started the code at the beginning of this kind of C, and finally found a plug-in The U disk can be started normally, because there is an F disk in the U disk system, and then I found the hidden file, which was written by the system when it was booted. I unplugged the U disk and the problem reappeared. Later, I changed the E disk back to the F problem. I want to come up with the software that is started with the system and leave some files on the F disk. If it is not, it will build itself, but even F disk is gone, it can only be reported wrong, so see this kind of blue screen can be compared.
Eight, each time the blue screen code is not the same
such a problem, basically caused by hardware, especially with memory as the first object that needs to be suspected, try to replace the memory, the second possibility is the CPU though This thing doesn't hurt badly, but from 2006 to now I have also encountered two, and other hardware will basically not cause the blue screen code to change.
Nine, occasional blue screen, and the code flashed over and restarted
This is there are two possibilities
1, XP, for example, click the right mouse button on my computer to select properties, find Advanced tab, find the startup and troubleshooting items below, and click Settings. In the pop-up window, find the middle & lsquo; system failure & rsquo; there are three options, the third item is automatically restarted, the check is removed, and the blue screen will stop after the problem.
2, has done the above settings, but will still be a flash and restart, that is caused by the graphics card or CPU overheating, open the chassis to view the state of the cooling fan and radiator. In addition, when you turn on the screen, you can't see the code flashing and then restarting yourself. At this time, it is impossible to set the first step in the system, then press F8 when the machine starts, choose to disable restart after the startup fails, the startup fails after the selection, the system will stop at the blue screen code. There, so that everyone can view the problem according to the blue screen code.
10, other blue screen code reference seventh item
Generally do the system to confirm whether it is a system problem, and then test the hardware in the following order, first of all, the possibility of memory is the biggest, then the CPU, then the hard disk, and finally The graphics card, the motherboard will not basically blue screen.

Copyright © Windows knowledge All Rights Reserved