How to install win10 system U disk?

Win10U disk installation tutorial:
This is recommended to use the U disk installation method, while supporting UEFI and traditional BIOS two modes. After downloading the image, install the Rubik's Cube, and find the Rubik's U disk in the Rubik's Cube application. See the following picture

According to the tips in the figure, you only need to select the U disk (must see carefully, don't choose the wrong one.) !) and after mirroring, click “Start production”
Note: If you are prompted to destroy the U disk data, please make sure that the U disk is not selected incorrectly, click OK.
After making the boot disk, restart the computer. Select to boot from USB to enter the installation environment. The general brand machine has shortcut keys for selecting the boot media. These shortcut keys are usually F12, etc. Press the shortcut key after booting the brand machine logo, and then select USB or Removable similar options in the list that appears to boot from USB. As shown below

If you can't find the shortcut key, you can press DEL, F2, ESC and other buttons to enter the BIOS setup interface when the brand logo appears on the screen. Find the Boot related settings in the BIOS settings. The USB or Removable option is set to the first boot option, and finally press F10 to save and exit. The specific operation is shown in the figure below. Note that there are differences in computer operation methods, you can search the online search for the corresponding model operation method.

▲ Select the Boot configuration option.

▲ After entering the setup options, select the Enable Priority Settings option.

▲ Adjust the USB device (Removable Dev.) as the first boot device

▲ After the setup is complete. Press F10 and select “OK” to save the settings and restart.

▲ After rebooting again, you can enter the installation environment. Follow the prompts.