What should I do if Win10 sets the router prompt parameter error?

In our lives, normal is a broadband multiplayer, which requires the use of a router. When a user recently set up a router under the Win10 system, the system always prompts for parameter errors. What should I do? The solution is not difficult, let's take a look at the Win10 setting router prompt parameter error solution.

The method is as follows:

1. Disconnect the router from the telecom optical cat and connect the computer to the router (any interface of 1, 2, 3, 4). After re-plugging in;

2, then we can open the browser to enter the address of the router, you can log in, in order to prevent late conflicts, press the setup wizard to set the login account password, click & ldquo; network parameter & rdquo; & mdash; & mdash; & ldquo; LAN port is provided & rdquo ;;

3, the & ldquo; IP address & rdquo; back fill: 192.168.X.1 (X may be between 2-255 Any number), remember to remember the IP address after setting, because if you want to set the router later, you need to use the ip address we just set to enter (later forget the ip address can only be solved by resetting the router) Click “ save & rdquo ;;

4, after the setup is complete, we will reconnect to the cat router wan port to access the Internet, you can also use the ip address just set up the router directly open, but there are no conflicts Causes no access to the router Home situation interface.

The above is the solution for Win10 to set the router prompt parameter error. If you encounter this error when setting up the router, follow the above steps to solve it.