After Win10 connects to wifi, how to solve the problem of no internet access?

  

What should I do if Win10 is connected to WiFi? I believe that everyone in the process of using the computer has encountered Win10 connection wifi and shows no Internet access rights, suddenly connected to the network, how is this going? How to solve this problem? In fact, this is caused by three major reasons.

1, the Internet router provided unsuccessful

2, the router restricts the wifi internet

3, Win10 laptop problem

a router Internet connection is not successful

If the wireless router is not successfully set up, that is, the connection between the router and the carrier server is unsuccessful and data cannot be transmitted.

At this point, the Win10 laptop, after connecting to the router's wifi, will have an exclamation point, showing no Internet access.

Check if the router's Internet settings are successful.

Log in to the router's settings interface to check whether the router's networking is successful. If the parameters such as IP address and DNS server are all 0, the router networking is unsuccessful, as shown in the following figure.

attention to the problem:

different router, the router settings to see if the location success is not the same, usually in the & ldquo; Internet settings & rdquo;, & ldquo; system status & rdquo;, & ldquo; WAN port connection status & rdquo;, & ldquo; WAN port settings & rdquo;, & ldquo; WAN & rdquo; settings, etc. selected to view.

Wireless router Internet settings are not successful, there are two reasons:

1, broadband itself failure

Do not use a router, let the computer directly connect the cat (home Broadband network cable), and then test whether the computer can access the Internet?

If the computer can't access the Internet at this time, it means broadband failure, please contact your broadband operator to solve it.

If the computer can access the Internet at this time, there is no problem with the broadband itself. The unsuccessful setting of the router Internet is caused by user operation problems.

2, user settings problem

Please restore the router to factory settings, then reset the wireless router to access the Internet, ensure that the IP address, DNS server and other options have IP parameters to ensure that the router is online The setting is successful.

Second, the router restricts the connection to wifi Internet

If the Win10 laptop is connected to wifi, it shows no Internet access, it may be a wireless router, the setting limits this Win10 laptop to the Internet .

Because there are some functions on the wireless router, it is used to limit the computer and mobile Internet. Common <;Wireless MAC Address Filtering>, <;Device Management>, "Internet Control"

Tips:

different routers, used to control computers, mobile Internet function names are not the same, greatly accelerates There is no way to list the.

Solution:

1. Log in to the router settings interface, find the relevant functions, and close them.

2, if you are not familiar with the router, it is recommended to restore the router directly to the factory settings, and then reset the router to access the Internet.

Third, Win10 laptop problem

If you restore the wireless router to factory settings, reset the Internet. Other computers, mobile phones connected to wifi can access the Internet, only this Win10 laptop connected to wifi, showing no Internet access; you can determine that this Win10 laptop has problems.

At this point, it is recommended that you use the “Troubleshooting” tool in the Win10 system for diagnosis and prompt operation according to the diagnostic results.

1, the lower right corner of the computer mouse right click & ldquo; network & rdquo; small icon & mdash; & mdash; "select: Troubleshooting

2, then Win10 computer will automatically start & ldquo; Troubleshooting & rdquo; program and automatically detect the problem

3, then follow the prompts to test results, to repair.

These are Win10 Xiaobian to introduce wifi connection showed no Internet access, the solution can not access. Follow the steps above and you will be able to access the Internet after the operation is completed.

Copyright © Windows knowledge All Rights Reserved