Win10 32-bit running dnf blue screen solution summary

One, 0X0000000A

is caused by a conflict between the driver and the software. If your machine has a blue screen, and each time it is this code, please think about whether you have updated the software or what driver. , uninstall it and look at it. Under normal circumstances, it can be solved. If you can't think of it and it is very frequent, then there is no way to re-do the system. If this is not only the code, restart the blue screen will also appear 8E, 7E, 50, D1, 24 and other code, then first consider memory damage.

Second, 0X0000007B

This code is related to the hard disk, but don't be afraid, it is not bad, it is the hard disk boot partition error caused by setting the problem or virus. If you are having problems installing the system with the original system disk, then your machine configuration is relatively new. As an old system disk, you don't recognize such a new hard disk interface, so you have to enter the BIOS to change the hard disk mode to IDE. Compatibility mode. Of course, now people use the ghost version of the operating system, the newer ghost disk does not exist this problem. People can't find the IDE problem, because many motherboards indicate that the wording is not the same. Some write AHCI and Compatibility. This AHCI is equal to SATA mode, and Compatibility is equivalent to IDE mode. If your operating system has been used for a while, and suddenly this problem occurs one day, then sorry, caused by the virus, press F8, select the last correct configuration, and return to the normal mode, then please re-do the system.

3, 0X000000ED

This fault has a relationship with the hard disk, the system probability is relatively large, and the probability of the hard disk being really bad is relatively small. I have gotten no less than twenty blue screen machines of this code, and only one of them is really bad. All that's left is a problem with the rollout, and it's one of the few blue-screen codes that can be fixed. The repair method is to find the original system installation disk (or the golden finger V6 that pe startup interface with the console repair). Here to use the system disk method, put the system disk into the CD-ROM drive, boot to the installation interface, choose to press R to enter the console repair, enter the console will appear prompt C: /everyone enter chkdsk -r here and then it will Automatically detect and fix the problem. After the repair is completed, restart the computer and you can enter the system. After entering the system, it is best to kill the virus first, then restart it and try it again. If it is normal, then there is no problem. If this code is still available, That means the hard disk has a problem, need to be replaced, or separate the problematic area, make a hidden partition, use the space behind to install the system.