How to solve the Win10 prompt router prompt "network password must be 40 or 104" problem

Swift wireless router is a good product, the function is very powerful. Specifically, it can be divided into wireless routers and wired routers. Since wireless is now more common, many people use it. Recently, users who use the Win10 system are prompted to use the Fast Router when the network password is 40 or 104 bits. How to deal with it? Now, let's work with Xiaobian to solve the Win10 quick router prompt "The network password must be 40 or 104".

with the following method:

First, if the wireless router is set WEP encryption, the above dialog box appears because the length of the password you entered does not meet the requirements, please confirm your Password.

WEP Encryption Mode in Wireless Routers The number of key characters required for each key type:

64-bit key: 5 ASCII characters and 10 hexadecimal characters.

128-bit key: 13 ASCII characters and 26 hexadecimal characters.

152-bit key: 16 ASCII characters and 32 hexadecimal characters.

Second, if the WPA-PSK/WPA2-PSK encryption is set in the router, the biggest reason for this situation is that the system does not support this encryption method.

Check if the system supports this encryption method:

“Wireless Network Properties”Select "Association" "Check in your system for support in "Network Authentication" The encryption method set in the router.

If there is no network authentication method set in the wireless router in the red box above, please change the encryption method in the wireless router to the encryption method supported by the wireless network card, or download the operating system patch to support the encryption of the front-end wireless router. the way.

The above is the Win10 quick router prompt "The network password must be 40 or 104", the content of the solution; if you encounter the same problem as the above, you can follow the above steps solve. I hope to help you here!