How does Win10 enter bios? What if Win10 can't enter bios?

  

After installing Win10 and Win8, you can't enter the BIOS after restarting the computer, and you can't start it quickly through the USB flash drive. Or, since using Win10 or Win8, the BIOS seems to strike, you can't enter the BIOS to set it up.

Because Win8 and Win10 both use a new fast boot mode, the boot speed is faster, skip the BIOS part and enter the system. In other words, you can enter the BIOS as soon as you cancel the quick start.

However, according to the small series of measurements, there are other cases where you can't enter the BIOS after installing Win8 and Win10, but Xiaobian can't analyze the specific reason, so I have to tell everyone about the relevant solutions. Let's try it one by one.

The first solution is to restart directly.

Because the quick start technology of Win8 and Win10 is only effective for shutdown, directly clicking "restart" is equivalent to letting the system temporarily turn off the quick start technology.

The second solution is to completely turn off the quick start technology.

The process of completely turning off the quick start technology is to open the control panel, select the hardware and sound

point the power option, go to the next menu

In one step, select the power button function.

When you come out of this interface, you can change the settings that are currently unavailable, and specifically modify the arrow to point to Enable Quick Launch. PS: This is a picture cut after the small series is cancelled. This is enabled by default.

But Xiaobian suggested using this program to get into the BIOS, then change it back. After all, Win10 quick start technology allows you to boot up every ten seconds (for ordinary mechanical hard drives).

If the above two solutions are not successful, then you can try the third option, unplug the power cord, wait 10 seconds, then plug it back in the power cord.

In the practice of Xiaobian, it is the third time that the power line scheme is successful, and the Win8 and WIn10 can be successfully entered into the BIOS after restarting.

Copyright © Windows knowledge All Rights Reserved