Can solve the 0xc000000e error fault without reinstalling the system

  


When the computer encounters a surprise attack, the bootloader of the Windows system will not work properly. Win7 cannot start normally and reports "0xc000000e" error at the same time. If we encounter a 0xc000000e error, we cannot enter the security. Mode, below, the author can solve the 0xc000000e error failure without reinstalling the system. Notebook fault




0xc000000e error

by first modifying the U disk BIOS first boot device, then the U disk The version of WinPE starts the system and runs the command prompt tool under WinPE system; then enter the following DOS commands in the position where the cursor is located (press the Enter key for each DOS command):

cd c:\\windows\\system32

bcdedit /set {default} osdevice boot

bcdedit /set {default} device boot

bcdedit /set {default} detecthal 1

The meaning of these sentences: 1, switch to the "C: WindowsSystem32" directory (c disk is the system disk)

2, set the hard disk partition where Windows7 is the default

3, set the partition where the Windows7 boot file is located

4, start the computer from the default location. After




completion of the operation, to restart the system log Windows7 normally, which means the proportion of a simple system. If you have encountered such a startup failure during the process of using Windows 7, you can also try to use this method to solve the error of 0xc000000e.



Copyright © Windows knowledge All Rights Reserved