Win7 system reload error "windows can not be installed to complete" how to do

1, the host is because the boot can not be, and the system fails, and constantly restart, so reinstalling the system is a feasible treatment. After entering with PE, the disk was not viewed with the DiskGenius tool. Is the MBR partition format;

2, because the U disk boot is not uefi boot, so I changed the BIOS hard disk SATA mode to IDE mode. Save and restart;

3, enter PE, I use the winntsetup tool to reinstall the system This method is more common. But this time using this method, after restarting, it is found that when the service is started, the error box that cannot be installed is popped up, and the restart is continued, and the fault appears here.

5, probably because my U disk does not have UEFI boot or my win7 system is UEFI boot, found partition format during startup device service activation process Does not match. Because my disk partition format is MBR. Therefore, I chose the original win7 CD-ROM installation, the installation steps should be familiar to everyone. Successful installation is complete.

According to the above method, you can successfully install win7 system. When you reinstall the system, you should encounter such problems. Don't worry, follow the above method to set up the operation. can.