Win7 can not find the hard drive how to solve?

Reinstalling the system is a very simple matter now, but if there is a problem when installing the system, it is very troublesome! Recently, when users reinstalled the Win7 system, a pop-up prompt "Cannot find the hard drive". How to solve this situation? The following small series for everyone to introduce Win7 can not find a hard drive solution.

Here's how:

1. Check the documentation that came with your computer or go to the manufacturer's website to find out what type of storage controller your computer uses.

2. Go to the manufacturer's website on another computer and download the latest drivers to a USB flash drive or other removable media.

3, Start Win7 installation again, in "Where do you want to install Windows?" ” On the page, click “Load Driver”.

4. Insert the removable media containing the driver into your computer and click “OK”.

5. Select the driver from the results list and click “Next”. Follow the on-screen instructions to continue installing Windows

6. Update the driver for the computer chipset

In some environments, use a specific type of chipset (part of the computer's internal hardware) and install it. Computers with advanced format hard drives may receive these errors.

Installing the latest drivers from the chipset manufacturer or changing some of the storage device settings in your computer's BIOS can help resolve this issue.

Case Study: Prompt to find hard drive solution when reinstalling the system

Symptom: Install the system with the installed system, when the hardware is detected, enter the blue background installation interface , prompted to find the hard drive, but can not install the system, but there is no problem with GHOST, all the way through.

Solution: This phenomenon is more common in laptops. The solution is also very simple: press F2 to enter the BIOS setting on the first screen (desktop press DELETE, IBM books press F1), then use the arrow keys to select Enter the config entry, then find the one with sata, change its value to “configuration”, finally F10, and Y, save and launch, so you can recognize it.

In summary: The above is the whole content of Win7 can not find the hard drive solution. If you have any problems with this type of problem, you may wish to try the above methods, and you may be able to solve the problem for you.