How to open TFTP server in Win7 system? Open TFTP server method

  
                

Win7 system has its own FTP server, but the default is not to enable the TFTP server. The TFTP server is turned on when needed. The TFTP server is mainly used for simple file transfer between the client and the server. However, users who have recently used the Win7 system do not know how to open the TFTP server. Where is it turned on? The following describes how the Win7 system can open the TFTP server and open the TFTP server.

The steps are as follows:

1. The next TFTP server will be installed. Generally, various firmwares will come with them. This can be found under my CSDN, free of points.

2, the first line inside means that the main directory of the face TFTP is this.

3. The second line inside is the listening IP address of the current server.

4, the first tag TFTP SERVER content is the current server log.

5, click on the following settings after the pop-up window, the main settings options only tftp port, tftp default directory, and DHCP service is enabled.

6. DHCP is mentioned here. Some routers or other embedded devices are allowed to use the "super terminal" connection during the programming process, but there is no IP address, and the IP address cannot be set. In this case, the DHCP server needs to be turned on for the embedded device. Connection.

7. If the embedded device supports automatic upgrade, the device will automatically download the BIN file system from the TFTP server after the TFTP server is enabled. If automatic programming is not supported, you need to enter some commands.

This article gives an example:

tftp 192.168.1.2

tftp"get "download file"

tftp"put "upload file"

tftp》q

The above is how to open the TFTP server and enable the TFTP server method in Win7 system, so that everyone can use the TFTP function normally. I hope to help everyone here.

Copyright © Windows knowledge All Rights Reserved