ASUS notebook Win7 boot card in the ASUS LOGO interface analysis of the reasons

  

Every time the computer will encounter problems when the boot failure, this is not, when the user is using the ASUS notebook boot, stuck in the ASUS LOGO interface does not move He uses the Win7 system. What are the reasons for this? Xiaobian has compiled some reasons for this.

Analysis:

First, usually a computer turned on, the first device is a self-test, if the card on the motherboard LOGO screen picture here, in most cases is not hard to detect in the past, can Try to replace the data cable with the hard disk. If there is no cable, you can try to swap the data cable at both ends, and then change the interface on the motherboard. (If it is a notebook, you can try to remove the hard disk, but if you can see if the LOGO interface can pass, you can judge whether the hard disk is faulty.)

If it is caused by a hard disk, you can insert the hard disk into the desktop or other notebook. Detect, if you can't do it, you can just replace the hard drive.

Second, the motherboard BIOS error, some motherboards have anti-intrusion mechanism. If you have recently changed the accessory, it may be caused by a motherboard BIOS error. The solution is to press the DEL button to enter the motherboard BIOS, initialize the BIOS settings, and then press F10 to save and restart the computer.

Third, check whether the machine has external device connection, U disk, mobile hard disk and other external devices may be plugged in the computer USB port forgot to unplug, causing the motherboard self-test card master can not pass. The solution is to pull out the extra external device and restart the computer.

Fourth, check if the keyboard and mouse are connected. This refers to the keyboard and mouse of the PS/2 interface. Many people care about it. The interface between the keyboard and the mouse is reversed, causing a self-test error of the boot computer to the card screen. The solution is to shut down and reconnect the keyboard and mouse. Usually the purple interface is the keyboard and the green interface is the mouse.

V. Check if there is a CD in the CD-ROM drive. Sometimes some CDs will cause the test to fail!

The above is the reason why the Asus notebook Win7 boot card is on the ASUS LOGO interface. There are five reasons why this may be caused, and the possibility of hardware failure is relatively large.

Copyright © Windows knowledge All Rights Reserved