After the mobile hard disk is plugged into the computer, the connection is not displayed. What happened?

After the mobile hard disk is plugged into the computer, the connection is not displayed. What happened?



You can right click on the "Manage" option in the "My Computer" to enter the disk management, check whether the inserted mobile hard disk is displayed on the "Disk Management", if it is displayed, then it will be The Disk Partition Marker for the removable hard disk is set to active and the path is modified. If it is not displayed, you can see if the mobile hard disk is displayed on another non-office computer. If it is not displayed, there is a problem with the mobile hard disk. If it is displayed, it means that your host has a problem with the media interface. I hope I can help you





Change to the rear USB port may be fine, the front power supply is not enough






Change the USB interface and try again



Drive the USB interface or change the USB behind the host to try the power supply in front of it. Br>





Let's look at the socket, the sockets on the back of the computer are generally wired





Try again with a USB interface.





Is the USB socket not good?





Change the USB socket
< Br>




Try another socket, or try another computer






A variety of possible connection can not be connected to the computer, one is the damage of the mobile hard disk box or the mobile hard disk, and the other is that the mobile hard disk power supply is insufficient, if there is an external power supply
it is recommended to use an external power supply
or Is the connection cable of the dual USB connector, there may be a broken USB interface, there may be system confusion, the driver of the mobile hard disk cannot be installed, etc. These can be fully detected, cleaned and repaired by the 360 ​​system, if the mobile hard disk There is no problem with the hardware, but the hard drive still can't be displayed. It only reinstalls the system. But before reinstalling the system, it is recommended that you take the mobile hard disk to another computer to try to see if you can recognize the mobile hard disk.