windows10 suddenly blue screen Nothing is done when the blue screen.
Hello, blue screen restart has many influencing factors, the summary is as follows:
First, the screen display system is busy, please press any key to continue...
1 Insufficient virtual memory causes system multitasking operation error
Virtual memory is a method unique to WINDOWS system to solve system resource shortage. It generally requires that the remaining space of the hard disk in the main boot area is 2-3 times of its physical memory. In order to make full use of the space, some enthusiasts stuffed their hard drives into full, and remembered the demanding requirements of WINDOWS. As a result, the virtual memory has an operation error due to insufficient hard disk space, so a blue screen appears. To solve this problem is very simple, try not to fill the hard disk full, often delete some temporary files generated by the system, exchange files, and thus free up space. Or you can manually configure the virtual memory, select Advanced, and transfer the default address of the virtual memory to another logical disk. This will avoid the blue screen caused by insufficient virtual memory.
2, CPU overclocking leads to operational errors
Overclocking is a common occurrence for enthusiasts, so the various faults caused by overclocking are inevitable. Overclocking, on its own, is to achieve higher performance on the basis of the original, but due to the overload calculation, the internal operation is too much, causing the CPU to overheat, resulting in system operation errors. Some CPUs have better overclocking performance. For example, Intel's Celeron processor and AMD-K6-2 processor are better, but sometimes there are some inexplicable errors. (Example: I have tried the INTEL Celeron 300A. When overclocking to 450, the floppy drive reads the disk when it does not accept the command). INTEL's less than 200 CPUs and AMD-K5's overclocking capabilities are not so good. It is recommended that high-end CPUs should be overclocked, so the heat dissipation work must be done well. It is best to install a large fan, plus some heat-dissipating materials such as silicone. As for some low-end CPUs, I suggest that you should not overclock, so that overclocking does not achieve the expected effect, but the blue screen often affects the normal speed of the computer.
Second, the memory strips are incompatible or damaged, causing operation errors.
The most intuitive phenomenon at this time, because this phenomenon can often be seen at the time of booting, the computer can not be started at all, the screen prompts the memory Have questions and ask if you want to continue. The cause of this error is physically corrupted memory or memory is not compatible with
other hardware
. At this time, only another memory has been changed.
Third, the optical drive is abnormally opened when reading the disk
This phenomenon is caused by the blue screen when the optical drive is reading data. This problem does not affect the normal operation of the system, just click on the disc or press the ESC button.
The above are some of the reasons why I encountered a blue screen in my maintenance computer. There may be other inexplicable problems that cause the computer to have a blue screen. In any case, after encountering such problems, you should carefully analyze the cause of the problem and then proceed to solve it.
4. The remaining space of the hardware is too small or too fragmented
Because Win9X needs to use the hard disk as virtual memory when running, this requires the hard disk to reserve a certain free space to ensure the normal operation of the program. In general, the minimum space should be more than 100MB, otherwise the "blue screen" may be related to the remaining space of the hard disk is too small. In addition, too many fragments of the hard disk can easily lead to the appearance of "blue screen". Therefore, it is necessary to perform defragmentation at regular intervals.
Five, system hardware conflicts
This phenomenon causes "blue screen" is also more common. Frequently encountered in practice is the conflicting settings of the sound card or display card. In the "Control Panel" → "System" → "Device Management" check whether there is a device with a yellow question mark or exclamation mark, if there is a try, delete it first, and restart the computer, automatically adjusted by Win9X, generally can be solved problem. If you still can't, you can manually adjust or upgrade the corresponding driver.
Hard incompatibility, driver problems, relative to hardware reasons to be less noticeable, you need to pay more attention to ... ...
First, too many loaders at startup
Do not start Load too many applications (especially if your memory is less than 64MB), so as not to exhaust system resources. Under normal circumstances, the system resources after Win9X startup should be no less than 90%. It is best to maintain more than 90%. If you run less than 70% after starting the program, you need to remove some applications, otherwise a "blue screen" may appear.
Second, the application exists BUG
Some applications have defects or errors in design, runtime may conflict with Win9X or compete for resources, causing Win9X can not allocate memory address or encounter its protection error. This kind of bug can be unpredictable, and free software is the most common. In addition, because some users are still using pirated software (including pirated Win9X), these pirated software will destroy and lose part of the source code during the decryption process, making the software very unstable, unreliable, and often lead to "blue screen."
Three, by unknown programs or virus attacks to the
this phenomenon as long as we usually encounter when surfing the Internet, when we are surfing, especially when entering some BBS stations, may be exposed My own IP was attacked by "hackers" with some software. It is best to install some defense software on your own computer. Then there is the login BBS to set security settings and hide your own IP.
Fourth, version conflicts
Some applications need to call a specific version of the dynamic link library DLL, if the old version of the DLL overwrites the new version of the DLL when installing the software, or delete the application, it is deleted by mistake The DLL file may cause the above call to fail, resulting in a "blue screen". Try installing it again.
Five, there are errors or damage in the registry
In many cases this is the main reason for the emergence of "blue screen". The registry holds important data such as hardware configuration, application settings and user data of Win9X. If the registry is faulty or damaged, it is likely to have a "blue screen". If your computer often has a "blue screen", you should first consider that there is a problem with the registry. You should detect and repair it in time to avoid further losses.
Six, software and hardware are not compatible
New technology, new hardware is developing very fast, if the installation of new hardware often appears "blue screen", then most of the BIOS or driver with motherboard
too Old, so that the hardware is not well supported. If your Motherboard
supports BIOS upgrades, you should upgrade to the latest version or install the latest device drivers as soon as possible.
Reinstall the system and try it out
May be caused by the following reasons: 1. Hardware loose, check reinforcement can be; 2. System driver is not compatible, upgrade driver; 3. Voltage is unstable, you can try to install voltage regulator; 4. Memory or hard disk failure, seek professional maintenance Or replace the memory and hard disk; 5. Unexplained program or virus attack; 6. Microsoft patch conflict. It is recommended to immediately use the 360 security guards and other security software for full-scale killing, and then repair with the blue screen repair program in 360 guards.
Which picture was you taking when you patched or upgraded the driver? If you are upgrading the driver, it may be that the downloaded driver is not compatible, just delete the newly installed driver in safe mode.
If there are other things, it depends on the situation.
There are possible compatibility issues
Restart to try, but it doesn't matter, the system can still 哟ing
Try it again
I usually restart when I encounter this situation, I can’t help repair the computer.