A large summary of various Windows 7 installation methods

First, the conventional method (also the most simple and effective way):

1. Unzip the downloaded ISO file to a disk, note that this disk is not the one you intend to install the win7 system into. Br>

2. Double-click the setup.exe in the unzipped folder and follow the prompts to install

2. Virtual CD-ROM virtual image installation (the general installation):

1. Use the virtual CD-ROM software such as Damon tool to create a virtual ISO file

2. Double-click setup.exe in the image folder and follow the prompts to install

The above two methods are common familiar installation methods. It is also the safest and most unpredictable installation method, but there is a shortcoming that it takes a long time. If you count the post-installation updates and application software installation, there is no time to make an hour.

The following methods are compared to "non-mainstream", but one big advantage is that the time spent will be shortened a lot, and some people test the complete installation of a system as long as 17 minutes (not counting the system after installation) The time the application was installed).

Third, use the safe mode to install:

1. Download the windows7 7057 ISO image, copy it to a non-C drive with a virtual drive (eg D:\\7057)

2 Press F8 - repair system - select the last command to fix - enter "D:\\7057\\sources\\setup.exe" (without the quotes) in the command box

3. Enter the installation interface Select Custom Installation

4. Select Installation Language, Format C Disk Installation

Special Note: This method is also applicable to installing 64-bit systems in 32-bit systems!

Fourth, there is a Vista installation disk installation method:

1. Download windows7 7057 ISO image, copy it to a non-C disk with a virtual CD-ROM (such as D:\\7057)

2. BIOS Select the CD-ROM drive to enter the Vista installation interface

3. Select the bottom left corner to repair the computer (automatic search system, prompt to load the driver or close, select the shutdown to enter the repair option)

4. Select the last item Command repair, enter "D:\\7057\\sources\\setup.exe" (without the quotation marks) in the command box, start the installation

5. Select the installation language, format the C drive installation

Note: If there is no system under the C drive, you can install it.

V. New installation windows under XP system 7

1. Download windows 7 7057ISO image, copy it to non-C drive with virtual drive (eg D:\\7057)

2. Put the bootmgr and boot directories in the D:\\7057 directory (in fact, just the boot.sdi and bcd files inside) to the root directory of the c drive, and build a sources folder in the root directory of the C drive. (Do not need to obtain administrator rights under XP)

3. Copy the boot.win under D:\\7057\\sources to the sources folder just created by the C drive

4. Run cmd as a member, then type c:\\boot\\bootsect.exe /nt60 c: prompt successful

5. Close the cmd window to restart the computer, automatically enter the installation interface, select the installation language, and choose the time that suits you. And currency display type and keyboard and input method

6. The “Start Installation Interface” appears. (Be careful, don't click “Install Now”) Click “repair mycomputer” in the lower left corner to enter” System recovery selection ", select the last "command prompt" (commandprompt), enter the DOS window

7. Enter "D:\\7057\\sources\\setup.exe" (without the quotation marks) to start the installation

8. Select the installation language, format the C drive installation

Six, the new installation of windows7 under Vista system (practical proof XP is also very convenient):

1. Download the windows 7 7057ISO image, copy it to a non-C drive with a virtual drive (eg D:\\7057)

2. Copy the Boot, EFI, sources folder and bootmgr in the D:\\7057 folder to C drive root directory

3. Copy D:\\7057\\boot under Bootsect.exe to the root directory of the C drive

Note: Due to the UAC of the Vista system, the second step needs to be managed. Privilege

4. Run cmd as administrator and enter c:\\bootsect.exe/nt60 c: Enter

5. Restart the system and automatically enter the installation interface. Click on the repair computer in the lower left corner. Repair my computer)

6. Select the last command prompt, enter the DOS window, enter D:\\7057\\sources\\setup.exe to enter the installation interface

7. Select the installation language, Formatted C drive installation

With the release of WIN7RC version, many friends may wish to download and try it out. However, the image file of Win7 has reached more than 2G, and the space occupied after installation has reached nearly 10G. If the conventional CD installation method is used for a long time, and if there is no DVD on the hand, the CD installation will be a piece. Very unhappy thing.

Because of curiosity, I also had a Win7 a few days ago. Since my laptop doesn't have a CD-ROM drive, I found a lot of hard disk installation methods on the Internet, some can be used, some can't. In the end, I found a better solution, which is similar to that of some friends on the Internet, but my method is to personally experience it, and the installation is successful.

The following, I will introduce my Win7 hard disk installation method to everyone, I hope to help everyone. This method is also suitable for optical drives, but it feels that the CD is installed slowly.

First, the software to be used

1, Win7 image file of course, look for it on the Internet, a lot. It is best to use the RC version, which is relatively new, and it is the last test version before the official version is released. Of course, the difference from the official version is the smallest.

2, virtual drive software

I use the daemon4304-lite version, can be set to run under XP, also find it on the Internet, a lot. Download it, of course, to install it on the original system.

There are two softwares above, and the others are not needed.

Second, installation method

1, create a new folder in any partition other than the original C drive, the name is taken casually, if I use D:\\win7

2, use the virtual drive to open the Win7 image file downloaded to the local hard disk, copy all the files inside to the D:\\win7 directory.

3, will be bootmgr in the D:\\win7 directory (this is a hidden file, you need to change the file view mode to display all files to see) and the boot directory is copied to the root directory of the C drive, do not Renamed, you must be in the root directory of the C drive, other places can not, or else, will not lead to success.

4, create a new folder in the root directory of the C drive, named: sources

5, copy the boot.wim file in the D:\\win7\\sourcess directory to the C drive Inside the soures folder.

6. Open the command prompt window of the original system and type in the command line: c:\\boot\\bootsect.exe /nt60 c: After the prompt is successful, you can close this command prompt window. Then restart your computer.

7, after restarting, you will find that the win7 installation program has started running, select the language, keyboard, time zone, etc. according to the prompts.

8. When the “Start Installation” interface appears, do not select Install Now, select “Repair this computer” in the lower left corner, enter the “System Recovery Selection” interface, and select “Command Prompt Window” ( It seems to be the last one).

9. In the command prompt window, type: d:\\win7\\souress\\setup.exe to start installing win7.

10, then select the language, keyboard, time zone, etc. When the hard disk and partition, if your C drive capacity is relatively small, you can format the C drive, so that your original system files will not be retained, otherwise, win7 will be installed in the C drive one more The name is: windows.old folder, which is all the files of your original system, it will take up a few G to a dozen G space.

At this point, you can wait for the win7 installation to complete. Installation using a hard disk is relatively fast, usually 30 minutes can be fixed, my notebook configuration is relatively low (CPU: Pentium M 1.86G, memory 1G, hard disk 160G) installed and used for about 40 minutes. The running speed is OK, and most of the programs can be used normally. Moreover, only two hardwares are not installed successfully after the hardware driver is installed, and other drivers are automatically installed.

Mobile hard disk installation windows 7 specific method (reproduced)

Starting from windows vista, Microsoft has adjusted the installation and deployment methods of its operating system, which enables individuals or enterprises to install in large quantities. It's easier and faster. According to the normal CD installation method, in the past, the XP operating system was installed. No matter how high the machine configuration is, it takes at least 50 minutes to complete the installation, and the hard disk space occupied by the installation is less than half of the vista, and since Windows Vista, Microsoft started. The installation method of the operating system has been greatly improved, which greatly shortens the installation time. Taking Microsoft's latest operating system, Windows 7, as an example, the normal CD installation takes about 30 minutes, and the USB flash drive installation takes about 18 minutes. The mobile hard drive installation is shorter, it only takes 13 minutes. (These data are the data that I personally installed and tested on my laptop. It may not be universal.) Of course there are other ways to install the speed. It is also faster, such as hard disk installation through pe, or virtual optical drive loading and installation under the existing system, etc., but the ultimate goal is to install it in a simple way and at the fastest speed, so much, I just I want to explain that the method of installing Windows 7 with a mobile hard disk is the most common for me. Installation method, then this post I will talk about the specific method windows 7 hard drive installation.

1, first of all you need to have a mobile hard disk, insert it into the computer's USB interface, and then set any partition of the mobile hard disk to "active", here we take "h disk" as an example explain. This step is done on the desktop: right click on the computer, select - Manage, then the "Computer Management" program window will open, then select - Disk Management, find the h drive, then right click, then select " Mark the disk partition as active" option, complete the program window. Next, in the Explorer of the computer, right-click the h disk and select Properties to see if disk compression is enabled. If enabled, be sure to click "Compress this drive to save disk space" in front of the General tab. Check to cancel. (This step is very important, if you do not cancel, the system will not be able to boot from the mobile hard drive installation).

2, all the windows 7 CD image files you downloaded are extracted or decompressed to the h disk, after the decompression is completed, restart the computer, set the boot order of the computer to usb -hd to start (in general, the computer will automatically It is recognized that the model of your mobile hard disk is selected to be booted by this drive. At this time, the computer will start the installation program from the mobile hard disk and start the installation of Windows 7.

3. If the machine is purchased after 2007, it usually takes no more than 16 minutes from startup to entering the system desktop. (The hardware configuration of the computer is different, the length of the installation process is not the same.)
Supplement: I have done this myself, I can say that I have said very detailed, the installation is very fast, the same as the installation of the CD You can format the partition. If your computer cannot boot from the mobile hard disk, please check the above steps. Do you have done it, and whether your machine supports the booting of the usb device.