First, Windows 8 Network and Sharing Center Open
A, open in the system tray
B, right click on the traditional desktop lower right network icon, click “Open the Network and Sharing Center”
It should be noted that the network icons in the figure are icons connected to the wireless network mode. According to the different network connection methods, there are several different network icon styles such as computer-like network icons. You can try more.
We open the Network and Sharing Center in the Control Panel
Step 1: Open the Control Panel. The previous section describes how many control panels are opened. Here is just one, use the shortcut Win+X, and then click on the Control Panel. Step 2: In the Control Panel, click "Network & Internet".
Step 3: Click on “Network and Sharing Center
Second, Network and Sharing Center Introduction
Windows8 Network and Sharing Center Interface Compared to Windows7 Network and Sharing Center, Windows 8 Network and Sharing Center is reduced in "Change Network Settings" "Connect to the network" and "Set up shared files". "Connect to the network" merged into "Set up a new connection or network", "Set up shared files", focus on the sharing of folder properties, and the appearance looks more concise.
The left sidebar of the Network and Sharing Center is:
Control Panel Home: You can go directly to the Control Panel home page.
Change Adapter Settings: All you can install on your computer can connect to the Internet, LAN Configure devices on the network;
Change advanced sharing settings: You can set permissions settings for different network users.
Internet Options: You can set the Internet properties of IE10.
Windows Firewall: You can set up Windows 8 network firewall.
Family Group: You can create and change family group settings).
The right side of the Network and Sharing Center is:
View Active Network: List all current networks that are connected to the Internet, LAN, and provide attribute description and status check on the network, and whether the network can join the home group. The internet.
Change network settings: You can add, delete, set up network connections, set up routers, access points, and troubleshoot when encountering network problems.
Third, network hardware property settings
In the network and sharing center, click "Change adapter settings" in the left sidebar to open the network connection window, all computers can be connected to the Internet, LAN, etc. Devices on the network appear in the list.
Right-click on a network device and click on Properties to open the properties of this device. There are two tabs: "network" and "share" Here we can manually set the MAC, IP, DNS, etc. of this device.
The following details how we can modify and optimize the device properties.
1. Modify the IP and DNS of the network device.
First Step: In the "Network" tab" This connection uses the following items", double-click "Internet Protocol Version 4 (TCP/IPv4)" or select this option and click “ Attributes & rdquo;.
Second Step: Windows 8 defaults to “automatically obtain IP address" and <quo;automatically obtain DNS server address", we only need to change the selected <;Use the following IP address" and “ The following DNS server address & rdquo;, then under the "IP address", "Subnet mask", "Default network management" and "Preferred DNS server", "Alternate DNS server" Enter the content that needs to be modified, and finally click “OK”
Tip: The subnet mask of the home LAN is generally 255.255.255.0, Windows 8 will be filled in automatically, and the subnet mask belongs to the more professional network communication content, so it will not be introduced. The default gateway can be left blank and not filled in. Windows 8 will automatically search the gateway server IP in the network. The preferred DNS server and the alternate DNS server can also be left blank without writing, and Windows 8 will automatically match the gateway's DNS server. Another thing to note is that if the router (gateway) connected to the computer has DHCP enabled, if the user specifies the IP address, the network connection will not work properly because the IP address assigned to the computer by the router may be the IP address set by the user. Not the same, causing conflicts.
Modify IP and DNS Advanced
Click the “Advanced” button to go to “Advanced TCP/IP Settings”. In “IP Settings", you can set multiple IP addresses, subnet masks, and default gateways for network devices. Windows 8 will automatically match each one most appropriately.
In the "DNS” tab, you can also set up multiple DNS servers and sort the DNS servers.
In the "WINS" label, you can set the mapping between the host name and IP address in the LAN. This feature is not used by home users and will not be described in detail here.
2. Modify the MAC address
In the "network" label"""""""""" Then click on the “Advanced tab", select “network address" in the attribute list, then select the “value” on the right side, and fill in the box with the MAC address without <;&&&&&&&; “010B0C75ECCD”, finally click “OK”
3.Installing and Uninstalling Network Protocols
Some network applications and games require some network protocols that Windows 8 does not install by default (such as Red Alert 2 LAN Battle requires the outdated network protocol IPX/SPX). We need to install it manually. Step 1: Click on the “Install” button in the “Network” tab to open the “Select Network Function Type” and select “Agreement” and click the “Add” button.
Step 2: If there is a network protocol in the list that you want to install, select and click “OK” If not, click “Install from Disk” and select the folder location of the network protocol to display the installed network protocol in the list, then click “OK” to confirm.
If you don't need some network protocols, select the following items in the "Network" tab; use the following items> in the network protocol you want to uninstall, click “Uninstall"