U disk installation system has an error How to do the installation failure

When using the U disk to install the system, some users hesitate to operate for the first time, often encounter some problems. For example, the U disk installation system fails; the U disk capacity has been used up; memory corruption and other problems. Therefore, Xiaobian has compiled some common questions about the failure of the U disk installation system, I hope to help everyone!

1. U disk boot disk production tool compatibility is poor
Solution: Choose a Good compatibility U disk boot disk creation tool.
Compatible U disk boot disk creation tool: U home U disk boot disk production tool
2. Not set up U disk boot
Solution: According to U home BIOS settings tutorial
Reset the USB drive to boot.
3. System format error or file corruption causes installation failure
Remedy: Download the GHOST system image file again on the Internet, and then copy it to the U disk.
4. Cannot find the hard disk after entering PE
Solution: Check if the hard disk data cable is plugged in, enter the BIOS, and change the AHCI mode to IDE mode.
5. Operation error caused the U disk installation system to fail
Solution: This problem often appears in the hands of novices, is also a more common problem, if you make a U U disk boot disk, and confirm the U disk If there is no problem with the boot disk creation, and the U disk boot entry is set correctly in the BIOS, then please see the U disk installation system tutorial.
6. Hard disk partition error
Workaround: The hard disk partition must be activated when the primary partition is activated. I don't know how to partition the hard disk.
7. When the GHOST system is installed, the recovery process always fails.
Remedy: Confirm that the GHOST version of the system file you downloaded is complete. If it is incomplete, please download it again. Check the hard drive for bad sectors.
The above is a common problem answer to the failure of the U disk system, I hope to help you because the U disk system failed!