Win10 system installation failure error code 0x80070017 causes and solutions

More and more users have upgraded the system to the official version of win10, but some users will encounter some problems during the operation. For example, some users encountered a failure when upgrading Win10, and the error code is 0x80070017. And only one code user doesn't know where the problem is, what should I do? The following small series will share the specific solution for this problem.

Cause analysis:

The installation path of the system is incorrect, most likely caused by the original partition error.

Workaround:

Create Win10 U disk installation disk and install it completely.

Note: Reformat the partition before installation, or repartition.
U disk installation windows10 system detailed graphic tutorial, the specific operation method is as follows:

Step 1: U professor U disk boot disk production tool preparation and precautions

Start to enter the installation environment . General brand machines have shortcut keys to select the boot media. These shortcut keys are usually F12, etc. Press the shortcut key after booting the brand machine logo, and then select USB or Removable similar options in the list that appears to boot from USB. As shown in the following figure
1, the computer memory can not be less than 512MB; U Professor U disk boot disk making tool to make the boot disk
2, U disk one (4GB capacity or more), backup U disk data, U disk The U disk will be formatted during the PE production process;
3. Download the latest version of the U-U disk boot disk creation tool from Professor U's official website www.ujiaoshou.com;
4, download win10 system 5, run the program Please try to close the anti-virus software and security software beforehand. (This software involves reading and writing to the removable disk. Some false positives may cause the production to fail!)

Second Step: Installation
1, open the desktop U professor installer icon (windows xp directly double-click to run, win7/vista/win8/win8.1/please right-click to select the administrator to run) as shown below:

2, Note: Install the software directory Can not choose to install to U disk, mobile hard disk Removable disk (usually the default directory is OK)

3. After the installation is complete, double-click the desktop icon to open Professor U, insert a removable device such as a USB flash drive or a removable hard drive, and the current list will be automatically listed in the disk list. Information about the drive letter, model, and capacity of all removable disks in the computer.

4. Select the removable disk you want to create. The boot mode USB-HDD or USB-ZIP is optional. The default is USB-HDD mode. (The chs mode is mainly for some Bios that cannot be detected. Generally, you don't need to check this option! If you want to convert the rest of the U disk to NTFS format, you can check the NTFS option.
Note: Formatting into NTFS will affect the U disk. To start the use of some functions, it is not recommended to check this option unless you need to store more than 4G single files!
5, try to quit anti-virus software and security software to avoid production failure, click “ One-click to create USB boot disk & rdquo ; button, the program will prompt whether to continue, confirm that the selected U disk has no important data and start production.
Note: If the U disk has been created using the previous version, please try to initialize the U disk before making the production! >
6. The software production process varies according to the computer configuration and the U disk chip. Please wait patiently.

Step 3: Use the analog start function to determine U disk boot disk production success Note: Because the U disk system file is hidden, after opening the U disk, you will find that there is no file inside. Please don't worry that the production is not successful at this time.

1, we can click on the software interface & Ldquo; Simulate start & rdquo; button to test whether the test is successful. (Note: the simulation start is only for the test U disk boot is successful, can not be used to test internal DOS and PE systems)

2 If the following interface appears, it indicates that the U disk boot disk has been successfully created. Then we can start to prepare to install the system.

Step 4: U Professor U disk installed win10 system

1. Copy the downloaded win10 system image file to the U disk name folder of the U disk maintenance disk.

2. Startup Item Settings

After making the boot disk, restart the computer. Select from USB

If you can't find the shortcut key, press DEL, F2, ESC, etc. to enter the BIOS when the brand logo appears on the display. Set the interface, find the Boot related settings in the BIOS settings, set the USB or Removable option to the first boot option, and finally press F10 to save and exit. The specific operation is shown in the following figure:

Note, different computers There are differences in the operation methods, you can search the online search for the corresponding model operation method.

▲ Select to start

▲ After entering the setting options, select the boot priority setting option.

▲ Adjust the USB device (Removable Dev.) as the first boot device
< after br> ▲ setting completion press F10, press select & ldquo; OK & rdquo; to save the settings and reset the computer to restart shortcuts attach brand table, as shown below:


2, the system starts the installation win10 <. Br>Enter the PE interface and use the up arrow of the arrow keys to select “Start the custom/IMG file (UJS directory)” and select the system file name in the Automenu interface.

▲ After rebooting, the U disk boot system enters the Win10 installer

▲ language, region and input method settings, Chinese users use the default Yes, click “Next"Continue

▲Click “Install Now”

▲Installation key VK7JG-NPHTM-C97JM-9MPGT available here -3V66T (only for professional version installation, activation is invalid), click and click “Next” to continue; or click “Skip” to enter the activation key after installation is completed

▲Click “Skip” will have a version selection window, select the version you want to install and click “Next” to continue.

▲Check "Through I accept the license terms", click “Next"Continue

▲Because we are currently performing a clean installation, we have to choose The second item "Customize" installation method

▲ If you want to replace the current system, first format the current system disk, and select this partition, then <; next step & rdquo; You can; if you want to install a dual system, select (except the current system partition and “ system reserved & rdquo; partition) other partitions, and then click "Next".

▲After that, the Win10 installer should be restarted at least twice, and wait patiently for about 30 minutes to enter the subsequent settings.

▲ After the main steps are completed, enter the subsequent setup phase. The first is to enter the product key (if the input is entered at the beginning of the installation, the interface is not displayed), after inputting, click <; next & rdquo; continue

▲ personalize Win10, you can Just click on “Use Quick Settings  in the bottom right corner to use the default settings, or click on “Customize Settings" in the lower left corner of the screen to arrange them one by one. We click on “Customize settings> to see what are the detailed settings

▲ You can select the data information that can be sent to Microsoft in the above options. However, be aware that if you turn off the “Location" information, the current device cannot be located (prudent devices such as tablets). Click “Next” to complete this part of the setup.

▲Select the ownership of the current device. If it is an individual user, select “I own it";Corporate and organization users can select “My organization" "click “ Next step & continue; 0000000

▲ Enter your Microsoft account information and log in to Win10. If you don't have a Microsoft account, you can click on “Create one” in the middle of the screen. You can also click on the bottom left > Skip this step  to log in with a local account

▲Microsoft Account Creation Page< Br>

▲Local account creation page, similar to Win7 installation, fill in the user name and set password and password prompt (required), click “ next & rdquo; can

< Br>

▲Awaiting Win10 for application settings, users logging in with Microsoft account need to wait longer.

▲Settings are completed and directly enter Win10 desktop, installation ends

This is the reason why the Win10 system installation failure error code 0x80070017 and the solution are all introduced. If you have friends, you may wish to try it out!