After upgrading win10 th2, how to do blue screen restart? After upgrading win10 th2, blue screen restart solution

Win 10th2 update has many problems, win 10th2 blue screen restart.

Driver conflicts, or hardware failures. Blue screen" hardware causes and solutions"blue screen" phenomena are closely related to memory size, CPU frequency, optical drive, hard disk fragmentation, etc... During the use of the computer, you often encounter blue screens. For beginners, it seems to be a computer disaster, and I don't know what to do.

In fact, as long as you understand the reasons, you don't have to be afraid. There are many reasons for the blue screen of the computer. The hardware reasons can be summarized as follows:

First, the screen display system is busy, please press any key to continue ……

1 Insufficient virtual memory causes system multi-task operation error. Virtual memory is a unique method for solving system resources that is unique to WINDOWS system. It generally requires that the remaining space of the hard disk in the main boot area is 2-3 times of its physical memory. In order to make full use of the space, some enthusiasts stuffed their hard drives into full, and remembered the demanding requirements of WINDOWS. As a result, the virtual memory has an operation error due to insufficient hard disk space, so a blue screen appears. To solve this problem is very simple, try not to fill the hard disk full, often delete some temporary files generated by the system, exchange files, and thus free up space. Or you can manually configure the virtual memory, select Advanced, and transfer the default address of the virtual memory to another logical disk. This will avoid the blue screen caused by insufficient virtual memory.

2, CPU overclocking leads to operational errors Overclocking is a common occurrence for enthusiasts, so various faults caused by overclocking are inevitable. Overclocking, on its own, is to achieve higher performance on the basis of the original, but due to the overload calculation, the internal operation is too much, causing the CPU to overheat, resulting in system operation errors. Some CPUs have better overclocking performance. For example, Intel's Celeron processor and AMD-K6-2 processor are better, but sometimes there are some inexplicable errors. (Example: I have tried the INTEL Celeron 300A. When overclocking to 450, the floppy drive reads the disk when it does not accept the command). INTEL's less than 200 CPUs and AMD-K5's overclocking capabilities are not so good. It is recommended that high-end CPUs should be overclocked, so the heat dissipation work must be done well. It is best to install a large fan, plus some heat-dissipating materials such as silicone. As for some low-end CPUs, I suggest that you should not overclock, so that overclocking does not achieve the expected effect, but the blue screen often affects the normal speed of the computer.

Second, the incompatibility or damage of the memory modules cause the operation error. This is the most intuitive phenomenon, because this phenomenon can often be seen at the time of booting, the computer cannot be started at all, and the screen prompts the memory. Have questions and ask if you want to continue. This type of error is caused by physical damage to the memory or incompatibility of the memory with other hardware. At this time, only another memory has been changed.

Three, the optical drive is abnormally opened when reading the disk. This phenomenon is caused by the blue screen when the optical drive is reading data. This problem does not affect the normal operation of the system, just click on the disc or press the ESC button. The above are some of the reasons why I encountered a blue screen in my maintenance computer. There may be other inexplicable problems that cause the computer to have a blue screen. In any case, after encountering such problems, you should carefully analyze the cause of the problem and then proceed to solve it.

Fourth, the remaining space of the hardware is too small or too much debris. Because Win9X needs to use the hard disk as virtual memory when running, this requires the hard disk to reserve a certain free space to ensure the normal operation of the program.

In general, the minimum space should be more than 100MB, otherwise the "blue screen" may be related to the small space left on the hard disk. In addition, too many fragments of the hard disk, it is easy to lead to the emergence of "blue screen". Therefore, it is necessary to perform defragmentation at regular intervals.

5. System hardware conflicts This phenomenon causes "blue screen" to be more common. Frequently encountered in practice is the conflicting settings of the sound card or display card. Check if there is a device with a yellow question mark or an exclamation point in the "Control Panel" & rdquo; → & ldquo; System & rdquo; & rarquo; & ldquo; device management & rdquo;, if there is a try to delete it, and restart the computer, Automatically adjusted by Win9X, generally solve the problem. If you still can't, you can manually adjust or upgrade the corresponding driver. "Blue Screen" software reasons and solutions are closely related to the hardware is the software, sometimes the software in the "blue screen" phenomenon is also "unfortunately", loaded too many programs, the registry has problems, soft Hard incompatibility, driver problems, relative to hardware reasons to be less noticeable, you need to pay more attention to ... ...

First, too many loaders at startup do not start Load too many applications (especially if your memory is less than 64MB), so as not to exhaust system resources. Under normal circumstances, the system resources after Win9X startup should be no less than 90%. It is best to maintain more than 90%. If you do not run any program after startup, it will be less than 70%. You need to uninstall some applications, otherwise it may appear “blue screen”.

Second, there are bugs in the application. Some applications have defects or errors in design. At runtime, there may be conflicts with Win9X or compete for resources, causing Win9X to not allocate memory addresses or encounter protection. error. This kind of bug can be unpredictable, and free software is the most common. In addition, because some users are still using pirated software (including pirated Win9X), these pirated software will destroy and lose part of the source code during the decryption process, making the software very unstable, unreliable, and often lead to "blue screen".

Three, due to unknown procedures or virus attacks, this phenomenon is as long as we usually encounter when surfing the Internet, when we are surfing, especially when entering some BBS stations, may be exposed I have my own IP, and I have been attacked by some hackers. It is best to install some defense software on your own computer. Then there is the login BBS to set security settings and hide your own IP. Fourth, the version conflict Some applications need to call a specific version of the dynamic link library DLL, if the old version of the DLL overwrites the new version of the DLL when installing the software, or delete the application, accidentally deleted the useful DLL file, it is possible Make the above call fail, resulting in “blue screen”. Try installing it again.

Five, there are errors or damages in the registry. In many cases, this is the main reason for the occurrence of "blue screen". The registry keeps important data such as Win9X hardware configuration, application settings and user data. If the registry is faulty or damaged, it is likely to appear "blue screen". If your computer often appears "blue screen", you should first consider that there is a problem with the registry, it should be detected and repaired in time to avoid greater losses.

Six, software and hardware are not compatible with new technologies, new hardware is developing very fast, if new hardware is installed, often "blue screen", which is mostly related to the motherboard's BIOS or driver is too old, so that Hardware is not well supported.

If your motherboard supports BIOS upgrades, you should upgrade to the latest version or install the latest device drivers as soon as possible.

The above is the upgrade of win10 th2 brought by Xiaobian after the blue screen restart how to do upgrade after win10 th2 blue screen restart solution, I hope to help everyone!