How to install M1213 printer under Win 10 system? How to install M1213 printer

  

How to install M1213 printer:

1. I thought that adding a network printer should be as convenient as win7. Under Control Panel, select <Hardware & Sound>, select < ;Devices & Printers>, choose to add devices, the system automatically starts to find connected printer hardware

2. Since it is a network printer, select the printer I need below to list the interrupt auto search, as shown below The system pops up the manual selection interface, select the third line <Use the tcpip address or host name to add the printer> check box before the option

3. After entering the next step, after the host name or IP address In the blank space, enter the address of the M1213 network printer. I don't know if this information can be found by the person who installed the printer. In win7, this step is OK. The computer will automatically install the driver after interacting with the printer, but win10 is unfortunately unable to find the driver. , you need to specify the driver manually.

4, you need to download the driver yourself, enter the printer's official website, select the service and support - driver download, then select the printer driver download, as shown below, type the printer model in the blank space on the right, select search, search After the result comes out, select the laser jet 1213nf multi-function printer

5, the system will automatically detect the current computer's operating system, and then choose to display the corresponding driver, as shown below is a version 5.0, is a 200M driver, released Time is 2015, content and drivers and some installation videos, unfortunately can not download pure drivers.

6, Xiaobian download to 95% very quickly, the last 5% took a long time, and does not seem to support the resume of the breakpoint, if you choose to pause, you must re-download, it is recommended to drive the website in China Download, then install the driver, double-click the downloaded driver file to enter the automatic decompression.

7, click setup to start the installation, select the advanced installation after the interface, save a bunch of unwanted software, remove the check box to join the customer feedback plan, the other use the default value, to the printer connection step Select to configure to print over the network

8. The following system will automatically install the driver. It will be installed in about 5 minutes. After the installation is completed, the printer will be prompted to be installed, as shown below. Display, select the second line to install the printer by address

9. On the address selection page, select the second line of IPV4 address, and then enter the address of the network printer in the space behind it, which is the IP of step 2; If you know the MAC, you can also select the first line of hardware address input, so even if the printer changes the IP is not affected

10, according to the IP or MAC provided in the previous step, the system will automatically find the printer, find the corresponding Before the hardware will prompt whether to install, select Y to proceed to the next step. After the system will copy some files to windows, it will be installed. You can try a test page first.

11. Since the device is a three-in-one device, it supports fax and copy functions. Therefore, after installing the printer driver, you will be prompted whether to perform fax-related settings. Small series is not required. Select Cancel to exit. If necessary, you can proceed to the next fax-related configuration.

The above is an introduction to the method of installing the M1213 printer, and friends who have the same problem can try it.

Copyright © Windows knowledge All Rights Reserved