Win10 restart can not enter bios how to do? Win10 can not enter the bios solution

Some users have said that after installing Win10 and Win8, the computer can't enter the BIOS. It can't be done through the U disk. Today, Xiaobian will bring you win10 and can't enter the bios solution. Let's take a look!

Because both Win8 and Win10 use a new fast boot mode, the boot speed is faster, skip the BIOS part and enter the system. In other words, you can enter the BIOS as soon as you cancel the quick start.

However, according to the actual measurement, there are other cases where you can't enter the BIOS after installing Win8 and Win10. You can't analyze the specific reason, so you have to tell everyone about the solution, let everyone try it one by one.

win10 can not enter the bios solution
related reading: win10 system official version of the official download address and win10 system official version of the two modes introduced

The first solution is to directly restart.

Because the quick start technology of Win8 and Win10 is only effective for shutdown, directly click “Restart”, which is equivalent to let the system temporarily turn off the quick start technology.

The second solution is to completely turn off the quick start technology.

The process of completely turning off the quick start technology is to open the control panel, select the hardware and sound

Click the power option to go to the next menu

< Br>

In this step, select the power button function.

When you come out of this interface, you can change the currently unavailable settings, and specifically modify the arrow to point to Enable Quick Launch. PS: This is the screenshot after the cancellation. This is enabled by default.

It is recommended to use this solution to get back into the BIOS, then change it back. After all, Win10 quick start technology allows you to boot up to ten seconds (for normal mechanical hard drives).

If the above two solutions are not successful, then you can try the third option, unplug the power cord, wait 10 seconds, then plug it back in the power cord.

In practice, it is the third time that the power line scheme is successful, and the Win8 and WIn10 can be successfully entered into the BIOS after being restarted.