How can I solve the problem that the software cannot be opened after the computer is turned on?

Recently, many users reflected that after booting the computer, they booted into the system interface. When they double-clicked the software they needed to open, they found that they could not be opened. What is going on? In fact, this may be caused by a computer virus or a computer program error that causes the computer software to fail to open. How to solve such a problem? The following small series introduces you to the solution that the software cannot be opened after the computer is turned on.

Operation steps:

1. Reinstall the system to see if it can be opened. If there is still such a problem in the boot, if you do not install the driver, patch, or software step by step, find out Don't install the right things.

2, if there is a key to restore the key, you can do a key restore, if you can not see if the following can help you.

3, power off, reconnect the line, keyboard, mouse. When the computer restarts, press and hold the F8 key. When the boot menu appears, select it and set it correctly the last time.

4, power off, reconnect the line, keyboard, mouse. Restart the computer, press and hold the F8 key, when the boot menu appears, select, safe mode, wait for a while to enter, click on the anti-virus, and restart.

5, use the system disk repair, open a command prompt to enter SFC /SCANNOW Enter (there is a space between SFC and /), insert the original system disk repair system, the system will automatically compare the repair.

6, set the CD-ROM drive as the first boot device in the BIOS, insert the original system installation disk and press R to select “ repair installation & rdquo;

The above is the solution that Xiaobian introduced to you that the software cannot be opened after the computer is turned on. If you encounter a similar problem, follow the above method. After the operation is completed, the software can be opened normally after the computer is turned on.