Quickly solve the problem of blue screen code 0X0000007b

The phenomenon of blue screen believes that everyone has met a lot, but the limited blue screen will have prompt information, for example, the blue screen code 0X0000007b appears. If this string of code appears, what should I do?

Because With the GHOST installed system, the via raid controller driver is not installed correctly, causing the computer to have a 0X000000D1 blue screen error frequently, so today we are going to delete the via raid controller driver. After the deletion, the blue screen code 0X0000007b appears.

First, I used the forced removal driver via raid controller in the driver wizard, and then asked to restart. After restarting, the blue screen code of the computer is 0X0000007b, try to restore with the last normal configuration, or blue screen, want to enter safe mode or Blue screen, some netizens said that this 0X0000007b is caused by memory, but the memory should not have problems, and then searched in the Microsoft Knowledge Base for the following explanation:

In the following cases, you may receive “ Stop 0X0000007B” Error Message:

> The device driver required for the computer boot controller is not configured to start during boot.

> The device driver required for the computer's boot controller has been corrupted.

> The information in the Windows XP registry (information about how the device driver was loaded during boot) has been corrupted.

Windows XP requires a miniport driver to communicate with the hard disk controller that is used to start the computer. If Windows XP does not provide a device driver for the controller, or if you are using a corrupted or incompatible driver, you must replace the driver with a valid copy that is compatible with your controller and Windows XP.

It should be removed the via raid controller caused the information in the registry to not clear the hardware, but the detection program can not find the corresponding driver, so the Stop 0X0000007B, this situation appears on many laptops now, In order to make the new SATA hard disk work in the best condition, the dell notebook modified the default working mode of the SATA hard disk controller in the BIOS of the E520/9200. However, because most of the original operating system disks of these two new models are not integrated with the corresponding SATA controller drivers, so that this new technology cannot be supported, when you install the Windows operating system, you are likely to encounter 0X0000007B blue screen error. Shenzhou's pen program is also blue screen code 0X0000007b if you do not change the hard disk mode.

Blue screen code 0X0000007b is often related to the driver. Once the driver is deleted, it is not a built-in driver, it is easy to cause 0X0000007b, and finally only reinstall the system to solve.

Just as there are many reasons for the blue screen, it is not a bad thing to have such a code. At least it can help you directly lock down the cause of the failure, and then directly find a solution to get twice the result with half the effort.