How can I improve the performance of this device after inserting a USB flash drive?


Recently, some users have reflected that the computer has inserted the USB flash drive and the right bottom of the computer pops up. This device can improve the performance of the window. What is going on? In fact, this is caused by the device not using the USB2.0 driver, but in the USB1.0 transmission mode. So how to solve this problem? The following small series introduces you to the solution to improve performance after inserting a USB flash drive.


1, computer motherboard too old, it may happen older model computer.

2. The usb2.0 function is disabled inside bios.


1. Enter the bios to set up the usb device. In this case, set the usb2.0 controller mode to hispeed and the bios EHCI hand-off to enabled. Different computer bios different, as long as we find a set of options with usb EHCI controller to open it to as:

2, restart the computer, insert U disk again, this equipment can improve Performance is not prompted, and the read and write speed is much faster than before.

The above is the solution for this device to improve performance after inserting a USB flash drive. If the user encounters the above situation, you can follow the above steps.

Copyright © Windows knowledge All Rights Reserved