How to solve the boot into the pe blue screen 0x000000b4?

  

Recently, many users have reflected that using the u disk to make a u disk boot disk, a blue screen appears when entering pe, and the error code 0x000000b4 is prompted. What is going on? In fact, this is caused by the inability to start the graphics card driver, so that it cannot enter the graphical interface, or there is a hardware conflict with the graphics card. So how to solve this problem? The following small series for everyone to introduce the solution to boot into pe blue screen 0x000000b4.

Analysis:

codes from the blue screen display information, this is the result & ldquo; can not start because the graphics driver, which can not enter the graphical interface, and the presence or graphics Hardware conflicts caused by .

Solution:

If the notebook is a dual graphics card configuration, it is recommended to enter the BIOS, first turn off the integrated graphics, and then try. If it is still blue screen, then you need to enter the BIOS again, change the transfer mode of the hard disk from AHCI to IDE mode. If it is still blue screen, it is recommended to redo a PE, then try to use PE installation.

The above is the solution for everyone to enter the pe blue screen 0x000000b4. If the user encounters the above situation, you can follow the above steps. After the operation is completed, it will not appear again. Wrong.

Copyright © Windows knowledge All Rights Reserved