Under the Mercury router vista system to view and modify the IP

Many people are still not familiar with the function of the VISTA system, after all, it is quite different from the previous WINDOWS system. Below, I will introduce the VISTA system to view and modify the IP address information of the machine.

First, right-click on the desktop network, click Properties, appeared Network and Sharing Center

Second, the corresponding network connection Click the right state, you can also click Manage Network Connections, if, connected by a wireless connection in a wireless network router on select properties; if the router is connected, via a wired local right-click and select properties connected

three view or modify the IP address information

(1) Check the local IP address information

Check the local IP address information, click on detail to

on the machine can be viewed in FIG Wi-Fi Check the IP address, gateway, and DNS server address. The configuration is correct:

IP address: 192.168.1.X, (2≤X≤254)

Subnet mask: 255.255.255.0

Gateway: 192.168.1.1

DNS server address: Consult the carrier

(2) Modify the local IP address information

Select Internet Protocol Version 4 (TCP/IPv4) and click Properties

Set the IP address and router on the same network segment. For the DNS server address, contact the network operator.

or more is to look at Mercury router vista system and modify the local IP address information, and I hope you can help to you.