Vista blue screen code meaning and solution

System blue screen is very common in Windows 98, it can be said that the system is the most eye-catching "landscape". With the continuous development of the Microsoft operating system, it has now entered the era of Windows Vista. In order to help everyone better use the new system, I have compiled some meanings about the blue screen code of the Vista system, and the corresponding solutions.

1, 0x0000000A: IRQL_NOT_LESS_OR_EQUAL

◆ Error Analysis: Mainly caused by the driver of the problem, defective or incompatible hardware and software. From a technical point of view. Indicates that there is too much process internal request level (IRQL) in kernel mode to access memory addresses that it does not have access to.

◇ Solution: Try to eliminate it with the 2, 3, 5, 8, and 9 solutions in the solution described earlier.

2, 0x00000012: TRAP_CAUSE_UNKNOWN

◆ Error Analysis: If you encounter this error message, then unfortunately, the result of KeBudCheck analysis is that the cause of the error is unknown.

◇ Solution: Since Microsoft can't help, you have to rely on yourself. Please think carefully about when this error occurred. What did you do to the system when it first occurred; What is going on. Identify the possible causes from this information and choose the appropriate solution to try to exclude.

3,0x0000001A: MEMORY_MANAGEMENT

◆Error analysis: This memory management error is often caused by hardware, such as: newly installed hardware, memory itself has problems.

◇ Solution: If it appears when you install Windows, it may be because your computer does not meet the minimum memory and disk requirements for installing Windows.

4,0x0000001E:KMODE_EXCEPTION_NOT_HANDLED

◆Error Analysis: The Windows kernel has detected an illegal or unknown process instruction. This stop code is usually caused by the memory of the problem or a reason similar to the previous 0x0000000A. Caused.

◇ Solution:

(1) Hardware compatibility problem: Please check the latest hardware compatibility list mentioned above to see if all hardware is included in the list.

(2) Problematic device driver, system service or memory conflict and interrupt conflict: If the driver name appears in the blue screen message, try disabling or deleting it in the installation mode or the recovery console. Drivers and disable all drivers and software just installed. If the error occurs during system startup, enter safe mode and rename or delete the file indicated in the blue screen message.

(3) If the error message clearly states that Win32K.sys: is most likely caused by third-party remote control software, the service of the software needs to be closed from the recovery console.

(4) When the first reboot after installing Windows: The biggest suspect may be when the system partition has insufficient disk space or BIOS compatibility.

(5) If it appears when you close a software: When there is a possibility that the software has a design flaw in the province, please upgrade or uninstall it.

5,0x00000023:FAT_FILE_SYSTEM0x00000024:NTFS_FILE_SYSTEM

◆Error analysis: 0x00000023 usually occurs when reading or writing the system partition of the FAT16 or FAT32 file system, while 0x00000024 is due to an error in the NTFS.sys file. (The purpose of this driver file is to allow the system to read and write to the disk using the NTFS file system).

These two blue screen errors are most likely caused by physical damage to the disk itself or by an interrupt request packet (IRP) corruption. Other reasons include: excessive disk fragmentation; file read and write operations are too frequent, and the amount of data is very high or caused by some disk mirroring software or anti-virus software.

◇ Solution: Step 1: First open the command prompt, run "Chkdsk /r" (Note: not CHKDISK, feel like this, but ……) command to check and repair hard disk error If the report has a Bad Track, please check and repair it using the inspection tool provided by the hard disk manufacturer.

Step 2: Then disable all software that even scans files, such as anti-virus software, firewalls or backup tools.

Step 3: Right-click on the C:\\\\winnt\\\\system32\\\\drivers\\\\fastfat.sys file and select “Properties> to see if the version matches the Windows version used by the current system. (XP should be C:\\\\Windows \\\\system32\\\\drivers\\\\fastfat.sys)

Step 4: Install the latest motherboard drivers, special IDE drivers. If your CD-ROM and removable storage are also provided with drivers, it is best to upgrade them to the latest version.

6,0x00000027:RDR_FILE_SYSTEM

◆Error Analysis: The cause of this error is difficult to judge, but a problem with Windows memory management is likely to cause this stop code to appear.

◇ Solution: If it is memory management, usually increasing the memory will solve the problem.

7, 0x0000002EATA_BUS_ERROR

◆Error Analysis: System memory memory parity generates an error, usually due to defective memory (including physical memory, L2 cache or graphics card memory) device driver The program accesses a memory address that does not exist, etc. In addition, the hard disk is damaged by viruses or other problems to appear this stop code.

◇ Solution: (1) Check for viruses (2) Use the "chkdsk /r" command to check all disk partitions. (3) Check the memory with a memory test software such as Memtest86. (4) Check if the hardware is installed correctly, for example: whether it is firm or not, and whether the gold finger has stains.

8,0x00000035:NO_MORE_IRP_STACK_LOCATIONS

◆Error Analysis: Literally, there should be a stack problem with the driver or some software. In fact, the real cause of this failure should be that there is a problem with the driver in the province, or there is a quality problem with the memory.

◇ Solution: Use the driver and memory related schemes in the general solution described earlier to exclude.

9,0x0000003F:NO_MORE_SYSTEM_PTES

◆Error Analysis: A bug related to system memory management, such as memory management problems due to a large number of input/output operations: Defective The driver does not use memory resources correctly; an application (such as backup software) is allocated a lot of kernel memory and so on.

◇ Solution: Uninstall all recently installed software (especially those that enhance disk performance and anti-virus software) and drivers.

10,0x00000044:MULTIPLE_IRP_COMPLIETE_REQUESTS

◆Error Analysis: Usually caused by hardware drivers.

◇Solution: Uninstall the recently installed driver. This failure rarely occurs.

11, 0x00000050: PAGE_FAULT_IN_NONPAGED+AREA

◆ Error analysis: problematic memory (including house memory, L2 cache, video memory), incompatible software (mainly remote control and Anti-virus software), corrupted NTFS volumes, and problematic hardware (for example, the PCI card itself is corrupted) will cause this error.

◇ Solution: Please use the solutions related to memory, software, hardware, hard disk, etc. in the general solution described above to eliminate it.

12,0x00000051:REGISTRY_ERROR

◆Error Analysis: This stop code indicates that the registry or system configuration manager has an error, due to physical damage to the hard disk itself or problems with the file system, resulting in An input/output error occurred while reading the registration file.

◇ Solution: Use “chkdsk /r” to check for and fix disk errors.