Seven steps to solve the router failure

More and more people are accustomed to using wireless routers, the installation is generally no problem, and now it is a Chinese interface, it is easy to get started, but in the process of use, there are often some manuals There are no problems and failures involved, sometimes it is difficult to cope and cannot be solved. The following is an analysis of typical faults caused by routers in wireless networks and provides solutions.
Many friends encounter various problems when they go online, most of them are related to the setting of the router, and the setting of this router is simply unclear for those who are not professional, there is no way to solve this. It is a place that many netizens are troubled with. So now, in order to enable more people to get rid of the difficulties of router problems, we will not be able to open 192.168.1.1 /192.168.1.1 can not get into the reasons and solutions to explain.
Resolve the 192.168.1.1 router can not open the fault seven detailed steps:
First, connect your computer and router to the network. Connection method. Connect the ADSL cat to the router and connect it to the WAN port. The remaining LAN port can connect to your computer or switch.
Second, the next time you set the IP address to 192.168.1.10 or 192.168.0.10. Subnet mask 255.255.255.0. (See the instructions in your router here. Is it 192.168.1.1 or 192.168.0.1. If Is 192.168.0.1. Then your IP is set to 192.168.0.10) Default gateway 192.168.1.1 or 192.168.0.1. Click “OK”.DNS is set to your own location. You can call broadband customer service .
Three, enter http://192.168.1.1 in the IE address bar and press Enter. The screen prompts to enter the user name and password. Fill in the router default 啲 username and password (I use 啲 router username and password are admin. Other routers You can refer to the manual) or open the IE browser. Enter http://192.168.0.1 in the address bar and press Enter. The screen prompts for the user name and password. Fill in the router default 啲 username and password (I use 啲 router username and password are admin. Other routers can refer to the manual) to see the manual. Try your router address to set.
4. After entering, the router setup wizard will pop up. If there is no pop-up or no-off, click on the left-hand side of the 啲兰; Setup Wizard”. The wizard will appear on the right. 点“Next”