Windows XP computer can not shut down the solution

Many windowsXP users' friends' computers should have encountered XP computers that can't be turned off. It's really a bad thing! 1. The sound file is corrupted when you exit Windows. You can't shut down. First of all, you can confirm whether the Windows sound file has been destroyed.

Many windowsXP users' friends should have encountered XP computer can't shut down. It is really uncomfortable. Things!

1, the sound file when you exit Windows can not cause damage to the shutdown

First of all you can determine the & ldquo; quit Windows & rdquo; if the sound file is corrupt & mdash; & mdash Open “Control Panel”, turn on “sound","Exit Windows” Sound Cancel. If Windows shuts down normally, the problem is caused by exiting the sound file. To solve this problem, you can restore the sound file from the backup or reinstall the program that provides the sound file, or you can define "Exit Windows" as silent.

2, the loader will not shut down due to excessive

run & ldquo; Msconfig & rdquo ;, the program at startup switch off point

3, pay attention to "advanced power management", can not shut down

In addition, the "Advanced Power Management (APM)" function on the computer can also cause shutdown or black screen problems . To determine if APM will cause a shutdown problem, open “Device Manager” to open “System Devices”. In the "Advanced Power Management" section, uncheck "Enable Power Management". If the computer shuts down gracefully, the cause of the problem may be APM.

4, start and shut down the fault

Everyone often encounters when Windows just starts, "You can safely shut down the computer", or Failures such as shutting down immediately at startup or restarting when shutting down. The cause of this type of failure is generally caused by damage to Wininit.exe or Vmm32.vxd files. The solution is to retrieve these two files from the WINDOWS installer tarball. Put it in the Windows\\system subdirectory, rename Vmm32.vxd to Vmm32.XXX, and then open “system tools”, select “system information”——“tool” System File Checker, select <; Extract a file from the installation disk", enter “Wininit.exe” or “Vmm32.vxd”. Repeat this step to replace the file Wininit.exe or Vmm32.vxd.

5, Config.sys or Autoexec.bat in question can not lead to the shutdown

Extract one file

Also from the installation disk, you You can check for conflicts in the Config.sys file or the Autoexec.bat file. Use a text editor to view the contents of these two files to see if there are any extra commands. You can also use “rem” to disable the execution of certain statements and gradually eliminate them until you find conflicting commands.

6, check the CMOS settings can not shut down

CMOS settings are not correct, it will also cause the computer to shut down, everyone can enter the CMOS settings page when the computer starts, the focus Check whether the settings of CPU FSB, power management, virus detection, IRQ disconnection, and disk boot sequence are correct. For the specific setting method, please refer to your motherboard manual, which has detailed setting instructions. If you don't understand the setting, it is recommended that you use the factory default settings directly.