Perfect explanation from the CD installation XP system installation steps

Sometimes I want to change the system, but I feel that it is very troublesome to bring the computer to the computer city installation. If you can install the system, how much better, you don't have to worry about it. It is. Now Xiaobian teaches everyone how to install the xp system by yourself, and get started.

The first step is to set the CD to boot:

1. Start the computer and hold down the DEL button until the blue background appears and the yellow English word BIOS settings window appears.

2. Select and enter the second item, “BIOSSETUP" (BIOS settings). Find the item or group that contains the BOOT text, and find the “FIRST”“SECEND”“THIRD” in order, respectively, to represent the first start & rdquo;“the second launch”&&quoquo; The third start is ”. In order, set to “CD drive”“floppy drive”“hard drive” (If you don't see these three E-texts on this page, usually the option menu on the right side of BOOT is “SETUP”; press Enter to see it.) You should select “FIRST” to hit the Enter key. The submenu that comes out selects the CD-ROM. Press the Enter key again.

3, after selecting the startup mode, press the F10 key, the E text dialog box appears, press the “Y” key, and press Enter, the computer automatically restarts, proving that the changed settings take effect.

Step 2: Install XP from CD-ROM

1. Insert the xp installation CD. Before restarting the computer, press the Enter key when the CD appears on the screen. This is to start the light, otherwise the computer will skip the light to start from the hard disk and read the hard disk.

2, after the xp system CD is launched, a blue background installation interface will appear. At this time, the system will automatically analyze the computer information, knowing that the monitor screen will not need any operation before it becomes black, and then a blue background will appear. Chinese interface.

3, after the above operation will appear xp system agreement, press F8 to agree to this agreement, then you can see the hard disk all partitions information list, and there are Chinese operating instructions. Select the C drive, press D to delete the partition (before remember to back up the useful files of the C drive), the position of the C drive becomes “unpartitioned”, and then in the original C drive position (ie “unpartitioned”). Location) Press C to create a partition. The partition size does not need to be adjusted. After that, the original C drive position becomes “New Unused” and press Enter to continue. Next, there may be a format partition option page. It is recommended to select “ format the partition with FAT32 (fast) & rdquo;. Press the Enter key to continue.

4, the system format C drive, then analyze the hard drive and the previous WINDOWS operating system, and then copy the file, it takes about 8 to 13 minutes (depending on the configuration of the machine).

5, after the completion of the copy file (100%), the system will automatically restart, then when you see the CD-ROM again....., do not need to press any key to let the system from the hard disk Start, because part of the installation file has been copied to the hard disk (Note: the CD can not be removed at this time).

6. The color XP installation interface with blue background appears. The left side has the installation progress bar and the remaining time display. The starting value is 39 minutes, which is also determined according to the configuration of the machine. Usually the machine of P4, 2.4 The installation time is approximately 15 to 20 minutes.

7. At the end of the installation, the computer does not need to do anything other than enter the serial number and computer information (fill in at random) and knock 2 or 3 times before the computer automatically restarts. The system will complete the installation automatically.

The third step, the driver installation

1, after rebooting, remove the CD, let the computer boot from the hard disk, enter the XP settings window.

2. Press “Next",“Skip”, select “do not register”,“complete”.

3, enter the XP system desktop.

4, right click on the desktop, select “ attribute & rdquo;, select “ display & rdquo; tab, click & ldquo; custom desktop & rdquo; item, check & ldquo; my computer & rdquo ;, select “OK” Exit.

5, return to the desktop, right click on "My Computer", select "Attributes", select the "Hardware" tab, select "Device Manager", which is the computer All hardware management windows, all the options with yellow question mark + exclamation mark in front of it represent hardware without driver installed, double click to open its properties, select “ reinstall driver ”, put the corresponding drive CD, select “ Automatic installation & rdquo;, the system will automatically recognize the corresponding driver and the installation is complete. (AUDIO is the sound card, VGA is the graphics card, SM is the motherboard, you need to install the motherboard driver first, if there is no SM item, it means no installation). Restart your computer after installing all the drivers. The driver installation is now complete.

Through the above three steps introduced by Xiaobian, a complete XP system is installed in this way. Although the installation needs a certain amount of time, it is quite convenient.