No more helpless problem Solving computer crashes easily

  

The computer crashes because the system cannot be started. The screen “freeze” does not respond, the mouse and keyboard cannot be input, and the software runs abnormally. Although the cause of the crash is multi-faceted, but the change is not separated from the situation, the reason can never be separated from both hardware and software. Friends of commonly used computers will encounter computer crashes one or more times or even more times. Of course, it is very distressing, but it is always inevitable. After hitting it, don't rush to repair first. Try it first. The following methods may be solved soon.

1. Use anti-virus software to kill the virus.

(1) First use anti-virus software to kill the virus. Now, the reason why we use the operating system to cause the crash of 98/2000 is even more difficult. If the crash is caused by software, it is difficult for ordinary users to find the reason. More people In solving the system's frequent crashes, anti-virus is used, and then the operating system is reinstalled. Probably only this way can reduce the possibility of crashes. In any case, the problem of solving the crash is from the software hand to the hardware, and the software problem is more; and from the software, the first thing to do is to check the virus, if there is no poison, then check other problems;

(2) Disk space is not enough;

(3) Check CONFIG.SYS, AUTOEXEC.BAT file command is wrong, especially the buffer buffers in the CONFIG.SYS file, Stacks stack, FILE can open the number of files and other parameters. If it doesn't work, reinstall the application;

(4) Check the memory with the test tool NORTON, QAPlus, or simply try to replace the memory, and then use the replacement method to solve the problem;

(5) Modify the settings registry;

(6) Set CMOS;

(7) Reinstall application software, such as drivers;

(8) Starting from the hardware, first look at the temperature in the chassis is not high, the higher the CPU operating frequency, the greater the heat, the attention should be paid to the heat problem; the next is to check the memory, the hardware is generally replaced. After checking the memory, check other boards; in fact, as long as there is no problem in your computer after a period of assembly, it is generally caused by non-human causes of software failures;

(9) The final solution is to format the hard disk and reinstall the operating system.

2. There is no troubleshooting on the screen.

First of all, please check if the signal cable of the monitor has been connected to the host. Please connect the signal cable firmly to the interface of the display card. And make sure your chassis speakers are intact and can sound. I heard the horn rang: If it is a horn, & ldquo; 嘀... 嘀嘀...” Two consecutive sounds are short, and the repeated alarm sounds. The explanation is that your display card is not plugged in, or the contact is bad. At this time, please turn off the power, open the case, re-insert the display card, and tighten the wire. Some compatible machines are not designed properly. If the AGP display card is tightened, the display card will be tilted at one end, causing poor contact. At this time, you must do it yourself and try to fix the display card. If it still crashes and continues to make the sound mentioned above, it may be that your display card has a problem. I suggest you take it on another machine and try it. If it doesn't work, then you need to change the display card. If the speaker emits “......嘀......嘀...”, each interval is longer and repeats. This sound is made because the system does not detect the memory stick and try it on a different memory slot. If not, please replace the memory module. I didn't hear the horn sound: In this case, we have to check the connection and each accessory one by one. First turn off the power of the host, then unplug the card (including the display card) plugged into the motherboard, and then unplug the hard drive data cable, floppy drive data cable, chassis panel RESET cable (power switch cable, speaker cable) ). Only the CPU and memory are left on the motherboard. Because sometimes the RESET switch is stuck and the motherboard is always in the reset state, the computer ice cannot be started. In addition, if the data cable of the hard disk is reversed, it will cause the host to have no reaction and then turn on the power, pay attention to whether the speaker emits a sound.

In short, the situation of computer crashes is also very complicated. Users can only find out the reasons themselves after they have accumulated their accumulated experience. Otherwise, they should ask professional personnel to repair them. Of course, the major problems listed above are only the causes of the frequent crashes and solutions. There are many other kinds of crashes that have not been discussed due to space limitations. In fact, as long as you encounter a crash, consult with experts and continue to accumulate experience through practice, I believe that you will soon become an expert in solving the crash problem.

Copyright © Windows knowledge All Rights Reserved