Expert support system repair can be solved without reloading

  


Core Tip: Many times we will find more and more system problems, if it will be used, then the system will not work efficiently. It's very high, and it doesn't even work. If you choose to reinstall the system, it will not only be troublesome, but it will also take a long time to wait. In fact, when the Windows system encounters a failure that cannot be started or runs incorrectly, we don’t... Many times we will find that our system problems are getting more and more. If we use it, the system will not run very efficiently. Even if it doesn't work properly, if you choose to reinstall the system, it will not only be troublesome, but it will also take a long time to wait. In fact, when the Windows system encounters a failure to start or run an error, we may wish to use the following six measures to quickly and effectively "first aid", the damaged Windows system, may be able to harvest the miraculous effect! 1. The last time you configure the operating system of Windows 2000 or later, the system registry will be automatically backed up after each successful startup. Once we find that the Windows system cannot be started normally this time, most of the time we made the wrong system. The operation or the wrong installation of some software has destroyed the relevant settings of the system registry. At this point, we can try to restart the computer system with the last successful startup configuration: just press the F8 function key in time to restart the system, call up the system boot menu, and then select “ last time correct The configuration of the project, in this case, the Windows system may be able to start normal. 2, repair system files If some of the core files of the Windows system are accidentally damaged, then even if you use "last configuration", Windows system is difficult to guarantee that it can start normally. If the Windows system only has a small number of system files damaged, then we may wish to use the built-in SFC scan repair command of Windows system to try to repair the damaged system files. Once the repair is successful, the Windows system starts again. Will return to normal. When repairing damaged system files, just click the “Start” and then “Run” dialog box. In the pop-up system run dialog box, enter the string command “sfc/scannow” and click the Enter key. After that, the command program will search and scan the system files at every corner of the system. Once the system file is found to be incorrect or the system file is damaged, it will automatically pop up a prompt interface, asking us to insert the Windows system. A CD-ROM is used to extract normal system files to replace abnormal system files, thereby achieving the purpose of repairing system files. If the system repair operation is successful, I believe that when we restart the computer system, we will not see any abnormality. 3, logout the current user If the damaged part of the Windows system is only due to the installation of inappropriate software, or the software is not properly set up, then we can usually "delete the current user" method by First aid to the damaged Windows system, because the impact of the software on the system settings can only be limited to the currently logged in users. Once the system is not working properly under the current user status, we can completely log out the current user and re-create it with other users. Log in to the system so that Windows can resume normal operation. Before logging out of the current user and switching to other users to log in to the system, we need to open the system's control panel window, then double-click the "User Accounts" item, and then click the "Add" button in the subsequent interface. To re-create a new login account, set a suitable access password for the account, and set the corresponding account as super administrator. After logging in to the Windows system with another account, some important data stored in the current user directory may not be accessible. For this reason, before logging out the user, we need to open the system's resource manager window to find the current account. user directory, for example, if the currently logged on the system account for the aaaa, then the default system account directory should be & ldquo; C: \\Windows\\Documents and ;, the directory below Settings\\aaaa & rdquo full backup of some important data to the system partition other than In the other partition directory. After doing the above preparations, now we can turn the implementation of & ldquo; start & rdquo; /& ldquo; cancellation aaaa & rdquo; command to the current logon account written off, and then again with just created a good account login Windows system; in After successfully logging into the Windows system with the new account, we will restore the important data backed up to the new user directory corresponding to the current account, so that the damaged Windows system can restore the previous normal running state. 4, re-registering DLL files Windows system is sometimes subject to frequent damage, mainly because many applications often share calls to some DLL files, once some applications are automatically uninstalled after use, the DLL files called by these applications while often also be deleted along with the other applications that way Windows system or system calls that a shared DLL file again, it is a natural phenomenon error occurred. In the first-aid case of the Windows system running abnormally caused by the loss of the system DLL file, we do not need to re-install the operating system, just need to re-register the DLL files that have been lost, the system can be restored to normal operation. It is. Considering that we don't know which DLL file is damaged or lost, we can use the following method to re-register all the DLL files of the system, instead of needing to be alone or Several DLL files are registered: First open a file editing program like Notepad, and then enter the following command line code in the corresponding program interface: @echooff for%1in(%windir%\\system32\\*.dll)doregsvr32. exe /s% 1 save the above command line code into a batch file called BAT extension, for example, where the author assumed that content stored to the tag file repair.bat; secondly create a shortcut icon repair.bat file, and Drag and drop the shortcut icon directly to the system's desktop. When you need to re-register all the DLL files in the system in the future, we only need to double-click the shortcut icon of the repair.bat file, and the system will automatically start all the DLL files. Perform a re-registration operation. Once all the DLL files have been re-registered, we may try to run the Windows system again. I believe the system will be very normal at this time! 5, restore the original file If the Windows system is not working properly due to the system registry was accidentally destroyed, then we can use the regular copy command to copy the original registry information directly to the system corresponding directory This can quickly achieve the purpose of recovering damaged system files. Since the Windows system is successfully installed for the first time, the original registry information will be automatically saved to the Repair subdirectory under the system installation directory, so we only need to copy the registry information under the Repair subdirectory directly to the system configuration. The directory can be: If the local computer only has one operating system installed, then we may wish to use the Windows 98 boot CD to boot the system to the DOS command line state; if more than two operating systems are installed on the local computer, That only needs to switch the system to another system that can run normally; then in the DOS command line state, use the CD command to switch the current directory to the "%windir%\\Repair" subdirectory state, and then execute The following string command: copysam%windir%\\system32\\config copysystem%windir%\\system32\\config copysoftware%windir%\\system32\\config copydefault%windir%\\system32\\config copysecurity%windir%\\system32\\config Once the above is executed String command In the process, when the system pops up a prompt asking whether to overwrite the previous file, we can directly answer the question. After the system registry information is replaced by all the original registry files, we restart the system again, I believe the system will be able to run normally. 6, system restore function If our computer is installed in the WindowsXP system, then in addition to the above method to rescue the damaged system, but also with the WindowsXP system-specific "system restore function", to the Windows system operating state returns to normal, the following is a concrete embodiment of steps of the method: click & ldquo; start & rdquo; /& ldquo; program & rdquo; /& ldquo; accessory & rdquo; /& ldquo; system tools & rdquo; /& ldquo; system restore & rdquo; The command, in the System Restore Settings Wizard interface that pops up, will "Restore my computer to an earlier time", select the item, and then click the "Next" button; the system will be popped up afterwards. In the point list window, we generally select a restore point that is closer to the current time to restore the system. Once the target restore point is selected, continue to click the “Next” button to make the Windows system automatically restored to the previous one. The normal working state is gone. It is worth mentioning that, before using this feature, we must run properly under Windows system state, appropriate and timely to create a good system restore point for future recovery system used when!

Copyright © Windows knowledge All Rights Reserved