Many small partners with Apple notebooks may use systems that are not used to it, or work must install Windows systems in Apple notebooks, including dual systems and virtual machines. As we all know, Apple notebooks do not have a network cable interface, which makes the notebook unable to use smoothly without the WiFi or WiFi signal. Today Xiaobian teaches you how to set up a wired network connection for Apple notebooks. Whether it is a dual system or a virtual machine, connecting to a wired network requires an external network card converter to convert the network cable interface to a USB interface. You can buy the converter online or in the electronics market. First, the wired network connection method in a dual system environment. Setting up a wired network connection under dual systems is relatively simple, and you can use the driver life. Download and install the driver life on the official website of the driver's life, open the software. Insert the NIC converter into your computer and the computer will not recognize the mobile device, but don't panic. Open the peripheral driver that drives the life and find the NIC converter. At this time, the converter driver display is not installed, click to install, the driver can install the wireless network card driver successfully within 20 seconds. After the NIC converter driver is successfully installed, you just have to wait for the computer to automatically connect to the wired network. The connection process may last for 2— 3 minutes, please be patient. If the connection fails, please open the driver's drive clinic to find the engineer online remotely. Second, the wired network connection method in the virtual machine environment. If you set up a wired network connection in a virtual machine environment, you cannot use the driver life. Because the virtual machine itself comes with a driver, it does not need to be installed and does not need to be updated. Installing or updating a driver in a virtual machine environment can have undesirable consequences! Please remember your friends. Therefore, you can only set it from the mac system. First, you need to visit the manufacturer's official website of the NIC converter. Under normal circumstances, the converter manufacturer will provide the mac driver download on the official website, you can find the mac driver corresponding to the converter you bought, follow the steps provided by the manufacturer, install the driver under the mac system. Second, plug the network card converter connected to the network cable into your computer and open the mac's System Preferences - Network option. Third, add a network connection in the network settings interface. Create a network with the NIC as the interface. It is worth noting that WiFi and wired networks cannot be used at the same time! When creating a wired network, turn off WiFi. For the specific operation process, please refer to the tutorial provided by the network card converter manufacturer, because the setting process of each network card converter is slightly different. After the installation is successful, the mac and the virtual machine can enjoy the Internet! The above is the way to set up a wired network connection for Apple notebooks. If you need a small partner, you can try it!