Although we all know that OS X system as Apple Mac computer native bring the system, has a very good user experience, is a highlight of the Mac product itself, but PC Xiaobian also often sees in many forums that many netizens hope to uninstall the OS X system and only install win7. This willingness is wise, but there is no real tutorial on the Internet to help everyone, so today PC6 Xiaobian makes this tutorial. I hope to help everyone. The first is the preparation work: 1. WINDOWS image file; (XP, win7, win8, according to individual needs) 2.U disk; (Recommended to use 8GB U disk, so you can easily wait directly to put the windows image directly inside) 3. A usable PC; (used to make a U disk boot) 4. BOOT CAMP for windows; other preparation tools for the WINDOWS system, according to their own needs to download, such as windows activation software. Here are the detailed steps: Step 1, uninstall the MAC system. Press the option button while booting, enter the mode selection menu, select Repair MAC 10.X, and then select the “Disk Utility” option. After entering, select your hard disk Macintosh on the left, click on “Erase” and erase. Note that the hard disk format must be changed to "ms-dos (fat) & rdquo; format, because Apple's hard disk format defaults to HFS + format, this format PE is no way to identify, so be sure to change to FAT format of. If your MAC computer already has several partitions, then erase each partition according to the above method, and change the format to “ms-dos (fat)” format. Many friends are actually troubled here, so changing the format is critical. Step 2, make the WINPE U disk boot tool recommended to use the old peaches U disk boot. Follow the tutorial below to download and make your winpe U disk boot device. After you're done, put the GHO file or IOS file of your previous WINDOWS into the "GHO folder" inside the U disk. Step 3, install WINDOWS to insert the prepared U disk into the computer, the same, boot the option button, after the option, select the windows option, the computer will enter the winpe system inside the U disk, as shown below:
PS: Because my computer system is already WINDOWS, so the disk on the left is also WINDOWS, this does not matter, anyway, select the WINDOWS in the red box as shown in the figure. Next, you will be taken to the menu options, as shown below, select the second one, & ldquo; run the old peach Win8PE x 86 Lite version rdquo;.
(PS: Explain here, don't follow the tutorials in the previous old peach website, select [4] and [1], "Do not install GHO into the first partition of the hard disk in PE" because We have to partition and format the hard disk again, so we need one more step.) Then start loading, as shown below, wait.
After entering the PE, cancel only the quick installation, and also need to partition, click “ cancel & rdquo;.
Open the built-in PE inside the "DISKGENIUS partition tool", as shown below:
After entering the partition tool, as shown below, the red box is the current hard disk partition status, right click on them, delete The current partition, no matter what pops up, click “ is ”.
After the deletion, the partitions in the red box will merge into a gray bar (like gray), which is unpartitioned. Then click on the fast partition above, as shown in the red box below:
According to your own needs to partition the hard disk, format suggestions or choose NTFS format, will save a lot of trouble in the future! Since I am 120 AIR, I only divided two zones, one 33, one 80. If you are a 500 MAC PRO, you can divide two zones. After the score is good, make sure that he waits for him to run. After running, turn off the partitioning tool. Then you can open "My computer" now, see if it is selected according to your choice, the partition has been successful, if not, repeat the above action, it must be wrong, no matter what he prompted you , select “ is & rdquo; right. Now you come again & ldquo; open the old peach PE one-click installed machine, as shown below:
select your good system disk C drive, OK, and then start running. At this point, wait for it, the computer will automatically restart after loading the image, it will stop on the white screen for about half a minute when restarting, don't panic, normal phenomenon, wait quietly, then WINDOWS starts Installed, then it's ok. Step 4, install the driver because the current WINDOWS image is basically built-in driver installation program, so when installing WINDOWS graphics card, sound card, etc. These drivers are generally installed together, but after installing WINDOWS, You will find that your keyboard light is not lit, and the right-click function of the two-finger touch is gone. Then open the BOOT CAMP prepared in front, and then download it again, extract it and get the following file, as shown below:
Open the BootCamp folder, click on Setup, as shown below:
Then wait for him to slowly, about 5 to 8 minutes. After installation, the familiar BOOT CAMP in the MAC system in your lower right corner appears. As shown below:
Then you set it yourself according to your habits, the keyboard light is also on, the keyboard's auxiliary functions are also available, then go enjoy WINDOWS!