Adding LAN function to the scanner

There is only one scanner, which does not support the network scanning function itself. When other users in the network need to use the scanner, only the PC connected to the scanner is operated, and then the scanned file is sent. Go to your own computer. Is there any way to solve this problem? Network scanning tool Netscan in this case, as long as the use of a software called Netscan we can easily achieve the purpose of sharing the scanner. Assume that the PC connected to the scanner is the A machine, and the other PCs in the network are the B machine. After decompressing the installation program, when the installation interface shown in Figure 1 appears, select the “Scanner Sharing Server Side” item to complete the installation of the program. In the program interface, switch to the “Settings” tab, the program will automatically find the scanner driver installed on the machine and display it in the “Driver” text box. Follow the prompts to set the "Scan interval" and "Maximum task", where "Scan interval" is set to 20 seconds ~ 30 seconds is appropriate, and "Maximum task" can be set appropriately larger Such as 50 or 100. Check the “Automatically accept scan tasks” item and click the “OK” button (Figure 2). The installation and setup of the A machine is completed. The LAN computer setting B machine is installed in the same way as A, except to remove the check box of “Scanner shared server side” in the interface, and check “Scanner sharing client”. After the client installation is completed, if you want to use the scanner for scanning operation, just select “BenQ NetScan 1.0→ use scanner” in the “Start” menu to open the main interface of the client, and then set a few tenths. Important parameters. The first is to select the server, enter the computer name or IP address of the A machine; then the resolution, which can be determined according to the requirements of the scanning quality. Generally, the black and white file can be set to 150~300; the image type can be selected. ; black and white & rdquo;, & ldquo; gray scale & rdquo; and & nbsp; color & rdquo; three types; scanning range is recommended to select & ldquo; the entire frame, "automatic selection" may lead to inaccurate range of program selection resulting in scan failure. After setting the above items, set the save path of the file after scanning, click the “Add Task” button to add the task to the task list, click the “Scan” button (Figure 3), the scanner will Start, and all we have to do is put the file into the scanner, the scanned file will be automatically saved to the path we specify. Tips In the same way, you can add multiple tasks to the scan list at a time. During the scan process, the programs will scan and save these files according to the added order. This article comes from [System Home] www.xp85.com