Breakthrough constraints allow you to access the Internet without restrictions

Our school dormitory uses a wired network. In order to restrict the Internet access of other devices, the school network administrator will bind the static IP of my computer Ethernet card MAC, so that the Internet port can not access the Internet using other devices. But I also have an Android phone, iPAD tablet, how do I get online? Technology experts always admire "technical, unconstrained", because the Internet port is bound to the computer's MAC address, so the breakthrough is to map the bound MAC address to the router, so that the router can access the Internet, and then The wireless hotspot of the router, my laptop, mobile phone, tablet can all go online. The following system home tells you how to break through the network barrier of binding Mac address? First, go to the computer city to buy a wireless router, connect the network cable to the computer to access the Internet, then start the command prompt, enter "ipconfig –all", get the IP, network card MAC, gateway of the current Ethernet local connection item. DNS and other parameters, you can see that the local IP address and MAC address are "192.168.1.105" and "50-E5-49-C9-9D-FF", respectively, now record this information (Figure 1). Prepare the network cable to connect the wireless router's LAN port to the computer, then enter the router settings interface, switch to “network parameter →MAC address clone", and then click “ clone MAC address", so that the current router's MAC address is set to It is consistent with the current computer network card MAC address (Figure 2). Continue to switch to “network parameter →LAN port settings”, set the LAN port IP to 192.168.0.1 (because the school switch network segment is 192.168.1.X network segment, the network segment should not be together again), then click &ldquo ;Save & rdquo; (Figure 3). After completing the above settings, continue to open the wireless hotspot of the router, then disconnect the network to shut down the computer, and finally connect the school network cable to the WAN port of the router, so that the mobile phone or tablet can open the Wifi connection and wirelessly access the Internet. This article comes from [System Home] www.xp85.com