In the multimedia tutorials and office conference halls, we often see the use of notebook connected projectors, and put the notebook screen onto the oversized projector canvas to achieve the purpose of teaching and explaining. So how does the notebook connect to the projector? I believe that many of my friends have not been in touch, the following system home Xiaobian will give you a detailed introduction to the notebook connection projector switching tutorial. For different brands of different configurations of notebooks, the operation method is different, the following authors for nuclear display notebooks without independent graphics, NVIDIA discrete graphics notebooks and AMD independent notebooks, respectively, introduce the use of notebook connected projectors and switch tutorials, specific The following: First, the core graphics card notebook connected projector Today, many thin and light office notebooks are not equipped with a discrete graphics card, but the use of Intel processor built-in core graphics card, the following we mainly focus on the core graphics card notebook, how to connect the projector. 1) First plug the external projector cable into the VGA video interface of the notebook, that is, connect the notebook to the projector first; 2) enter the traditional desktop of the laptop, right click on the desktop in the blank space of the desktop, and then select the screen resolution (Win7) /Win8 Universal); 3) Then in the pop-up screen resolution setting options, select “Advanced Settings as shown below; 4) Next in the core graphics settings, switch to “ Intel Core Graphics Control Panel ”, as shown below; 5) Next, we then select “ click on the graphic properties & rdquo; settings, as shown below; 6) then select “ display & rdquo; operation, as shown below; 7) last Click the multi-screen display in the drop-down menu. This item is to set the multi-screen to realize the projector switching option. It should be noted that you can select all the above settings by selecting the copy mode (copy) or expansion on the left side. . The above is the specific setup steps for the nuclear notebook to connect to the projector. The setup steps seem to be many, but the operation is very simple. Second, NVIDIA independent display notebook connection projector method control 1) is also connected to the external projector connection with the laptop, this is not much to introduce; 2) right click on the laptop desktop, then select "ld"; open NVIDIA graphics control Desk” If it is an N-card independent notebook, the general right button can see this item, if not, please update the graphics card driver; 3) After entering the NVIDIA graphics card console, click “display” , select “ set multiple displays & rdquo;, as shown below; 4) Next we check the external display screen that has been detected, as shown below; 5) Then click on the application to achieve the extended function; 6) Then then drag screen 1 and screen 2 to adjust the arrangement position of the display as shown below; 7) Finally, right click on screen 2 in the arrangement chart, select copy 1, click on the application, and the screen copy function can be realized. . Through the above seven steps, the setting operation of the N-card independent notebook connection projector can be completed. Third, AMD graphics card notebook projector method steps Steps Finally, let's take a look at how AMD's independent notebook connected to the projector, the method is basically similar to the N-card notebook, not to mention, let's take a look at it. 1) Also connect the external projector connection to the laptop, this need not be introduced; 2) Right click on the notebook desktop, and then click to open "AMD graphics console" (if the right button does not have this item, please pay attention to check the notebook graphics card Whether it is AMD alone, if it is, please update the graphics card driver to the latest); 3) Enter the AMD graphics console and click on the desktop and display, as shown below; 4) Here we directly select & ldquo; copy or expand the desktop & rdquo ; can be, as shown below; 5) The last step is that in the following additional options, we can also appropriately adjust the arrangement of the screen & rdquo; and select “ screen copy & rdquo;, as shown below. About how to connect the projector to the projector, I believe you can learn it after reading the above detailed tutorial. This article comes from [System Home] www.xp85.com