Automatic power-off failure when the computer starts up.

A computer that meets a computer will automatically turn off when it is turned on, and it will not respond when it is turned on. After that, it will not respond when you turn on the computer. System Home Xiaobian specializes in several troubleshooting methods, I hope to use the computer to automatically power off the power failure one: the specific situation is this: turn on the power switch, press the power button to start, the fan turns, the machine has motion After a while, the power is turned off, the fan does not move, the indicator light is not bright, and then press the power button is useless. Pull the power supply, after a while, plug it in again, restart it and repeat the above situation. After I dialed the power of the hard disk, I can boot it to detect that the hard disk does not have this step. Then tidy up the CD-ROM power supply, after a while, you can boot normally for a day (no longer without shutting down). I would like to ask how this is going on. I don't want to do this every day. How can I solve this problem? A: This kind of automatic power-off after power-on is likely to be caused by a power supply or a motherboard failure. The causes of the fault are various, such as IC chips, capacitor burnout, problems with a certain circuit, etc. Generally speaking, such faults are not repairable by individuals. It is recommended to repair or replace related accessories. It is recommended to first try to replace the power supply. In addition, the power quality problems of the mains (such as low voltage, abnormal fluctuations, etc.) may also cause such a power failure phenomenon. The power-on failure may also be caused by the following reasons: First, there is a problem with the chassis power switch, such as the reset spring failure, and the CPU is overclocked, or the CPU fan has a problem. Third, there are short-circuit faults in accessories such as optical drive hard disks. Computer power-on automatic power-off failure 2: Fault analysis: After the computer is turned on, it will automatically turn off after ten seconds. The CPU and other power supplies have been cleaned up. There is no problem because the hardware can be turned on before using another computer's hardware test. What is the situation? A: It may be that the CPU temperature is high. It is recommended to download the CPU temperature test software online. CPU problem, then consider whether you want to change the fan or add silica gel, etc.! Computer power-on automatic power-off fault 3: Fault analysis: My computer has been frequently turned on and off recently, I don't know how it happened, it used to be good, the temperature has dropped recently. It is often the case that this is happening. The temperature drop is likely to cause some problems that we can't figure out. It is recommended that you open the computer case and re-plug the things that can be inserted and removed. After reading, can you solve the problem? Under normal circumstances, the computer automatically turns off the power. The automatic power off after booting is likely to be a fault in the power supply or the motherboard. The causes of the fault are various, such as IC chips, capacitor burnout, problems with a certain circuit, etc. Generally speaking, such faults are not repairable by individuals. It is recommended to repair or replace related accessories. It is recommended to first try to replace the power supply. In addition, the power quality problems of the mains (such as low voltage, abnormal fluctuations, etc.) may also cause such a power failure phenomenon. This article comes from [System Home] www.xp85.com