Win10 system how to modify the physical address of the network card

Before the modification, you can first determine the MAC address of the network card to be modified, there are many ways to query, such as:
1, in the settings & rarr; network and Internet & rar; WLAN /Ethernet, as follows Figure ——


2. In the Control Panel & Rarr; Network and Sharing Center & Rarr; Change Adapter Settings, right click or double click on the network connection you want to modify, in the details In the ” you can see the MAC address, as shown below ——

3, in the command prompt, use the ipconfig /all command to view all network card information, this method is very straightforward, as shown below — —

If you have multiple network cards, or use software such as virtual machines, there will be a lot of content displayed here, so check out which one is the network card address you really want, which says VirtualXXX The class is generally a virtual network card, the real physical network card will have the name of Intel, Realtek and other manufacturers, as shown below ——

▲Photo description: This is the physical network card of the test machine
Method 1 : Then the Device Manager to modify
this method is not a panacea, because some network cards do not provide an interface modification, but it is most convenient. The operation is as follows:
1, find the actual network card in the control panel → device manager & rarr; network adapter, then right click or double click to enter the properties, as shown below ——