Win10 system computer connected to the mobile phone wifi hotspot will be blue screen restart failure analysis and solution

win10 users successfully connected to the mobile phone WiFi hotspot, but encountered a computer blue screen with automatic restart, and prompted error code: KERNRL_SECURITY_CHECK_FAILURE, the specific phenomenon As shown below:

Failure reason analysis:
Intel wireless network transmission signal transmission protocol (802.11n xitonghe.com mode) and some mobile phone WIFI hotspot signal mode conflict, and wireless network card driver The version does not matter much.
Workaround:
In the "Device Manager", find the wireless network card "Properties" in the "Advanced" under "The 802.11n mode" value is changed to "disabled" After saving, restart the network card to solve. As shown below:

can be used after the change, but the maximum rate of wifi transmission is 24Mbps (about 50Mbps before the change), but the use of mobile hotspots is enough. However, it is recommended to enable 802.11n mode to ensure the use of network speed under WLAN.
Remarks: If you still haven't solved it after the operation, you can only recommend to update the wireless network card driver again!
The above is the fault analysis and solution for the blue screen restart after connecting the Win10 system computer to the mobile phone WiFi hotspot. The introduction of the content, friends with the same problem can be solved according to the above method!