Win10 how to enter bios

installed Win10 and Win8 restart the computer can not enter the BIOS, can not quickly boot through the U disk? Or, since using Win10 or Win8, BIOS seems to strike, you can not enter the BIOS to set .
Because Win8 and Win10 both use a new fast boot mode, the boot speed is faster, skip the BIOS part and enter the system. In other words, you can enter the BIOS as soon as you cancel the quick start.
However, according to the small series of measurements, there are other cases where you can't enter the BIOS after installing Win8 and Win10, but Xiaobian can't analyze the specific reasons, so I have to tell you all the relevant solutions, let everyone one by one. Go and try.
The first solution is to restart directly.
Because the quick start technology of Win8 and Win10 is only effective for shutdown, directly click “Restart”, which is equivalent to letting the system temporarily turn off the quick start technology.
The second solution is to completely turn off the quick start technology.
The process of completely turning off the quick start technology is to open the control panel, select the hardware and sound

point power option, go to the next menu

, select the power button function.

When you come out of this interface, you can change the currently unavailable settings, and specifically modify the arrow to point to enable quick start. PS: This is a picture cut after the small series is cancelled. This is enabled by default.

But Xiaobian suggested using this program to get into the BIOS, it will be changed back, after all, Win10 quick start technology allows you to boot up to ten seconds (for ordinary mechanical hard drives).
If the above two solutions are not successful, then you can try the third option, unplug the power cord, wait 10 seconds, then plug it back in the power cord.
In the practice of Xiaobian, it is the third time that the power line scheme is successful, and the Win8 and WIn10 can be successfully entered into the BIOS after being restarted.