How to deal with "unrecognized network prompts" in Win10 system?

If there is no normal Internet access in the Win10 system, there are four basic situations: limited network access, unrecognized network, no dialing, and no network cable plugged in. I also often encounter local connection prompts "unrecognized network" situation, if your Win10 system can not access the network, and prompt "unidentified network", we can solve the following methods. The processing method

Win10 systems appeared & ldquo;; unrecognized network & rdquo:

1, the top left click on the desktop & ldquo; Win & rdquo; button from the context menu to select “Run” item to open the "Run" window (directly press Windows+R to open it).

2, from an open & ldquo; run & rdquo; window, enter & ldquo; cmd & rdquo; MSDOS and press Enter to enter the interface, as shown in FIG:

3, to open the "Command Prompt" window, enter the command "ping router internal network address" and press the Enter key to detect the computer network card and router line connection.

If the feedback message prompts "Unable to access the directory host" or "<quo; access failure, general error", it indicates that there is a fault in the line connection between the computer network card and the router. In this case, check the connection line; If the request times out, the connection is intact, but the configuration is incorrect or the network disk is in the VPN state.

4, after the exclusion of the problem hardware connection line, if the computer still can not normally access, then restart the recommended routers and switches. The recommended practice is to disconnect the switch directly and wait a few minutes before powering it back on.

5, of course, the router & ldquo; MAC address & rdquo; filtering will cause the computer is turned not access the network, will also appear & ldquo; unrecognized network & rdquo; prompt. To enter the router back-end web interface, switch to the "Behavior Management"---"MAC Address Filtering" tab, and disable the "Filter Mode" option by clearing the check box to "Enable & rdquo;".

6, to the router using & ldquo; static IP address & rdquo; in the case of distribution, we need to set the IP address of the computer terminal manually. Right-click the <quo;network” icon to the right of the task and select the “Network and Sharing Center' item from its right-click menu.

7, from an open & ldquo; Network and Sharing Center & rdquo; screen, click the top left corner of the & ldquo; Change for settings & rdquo; button to enter, and the pop-& ldquo; Fi & rdquo; In the interface, right-click the “Unrecognized Network” icon and select the “Attributes” item from its right-click menu.

8, then from an open & ldquo; Properties & rdquo; window, select the & ldquo; TCP /IP v4 & rdquo; and click & ldquo; Properties & rdquo; entry, check from open new interface & ldquo; Use the following IP address & rdquo; and “ use the following DNS server & rdquo; item, and manually set the IP address.

9, in addition, for the problem Win10 can not access to the Internet, we can make use of & ldquo; 360 DNS preferably & rdquo; tools to select the best DNS, in order to reduce network latency, ensure network Normally smooth. Find the “DNS Preferences” tool directly in the “360 Security Guardian”--"-More Features"-"Network Optimization" column.

10, from the opened & ldquo; DNS preferably & rdquo; window, just click & ldquo; DNS preferably started & rdquo; button, and the program will automatically detect the delay situation of each of the DNS, and to To get the best DNS solution, click the “Immediately enable” button.

By the above method, the system can solve the basic Ethernet prompted Win10 & ldquo; unrecognized network & rdquo; problem. As long as you find the cause of the problem, many things can be pushed. If you have any questions about this, you can leave a message in the comments section below.