What should I do if the Win10 system frequently has an IP address conflict window?

IP address conflict is a frequent prompt after the user uses the IP address automatically assigned by the router. Because the LAN has other users who use the same IP address as the Internet, if it needs to solve the problem, you need to Change the setting of the automatic acquisition gateway and IP address in the IPv4 protocol to manually fill in the gateway and the local IP. Tip a big reason

In fact, the sudden appearance of Win10 system IP address conflict is because after a fault when the router assign IP addresses, so the easiest way is to reboot the router to restart, the general failure to Can be solved. But for some users, I feel that restarting the router is too time consuming, so you may wish to try the following methods.

1. First check the correct IP address on the computer, press the win+X shortcut on the keyboard to open the shortcut window, and then click to select the network connection in the shortcut window that opens.

2. In the window that opens, find the network connection you are using, right click, select the status, click on the details in the network status, and then write down “Ipv4 address”,“Ipv4 Subnet mask & rdquo;, “ Ipv4 default gateway & rdquo;, & ldquo; Ipv4 DHCP server & rdquo;, “ Ipv4 DNF server & rdquo; 5 items of information.

3, and then on to their computers, according to the first step to open the & ldquo; Fi & rdquo ;, then & ldquo; Ethernet & rdquo; or & ldquo; wireless network & rdquo; right-click, Select “Properties", in the properties interface, click “This connection uses the following items"decentralized"internet protocol version 4 (TCP/IPV4)" and then click on Properties” to record the previously recorded data Fill in and click OK to save.

When filling in the gateway, you can use the command: ipconfig to get it. The IP of this machine is quite random. As long as it is in the IP network segment of the gateway, you can set it at will.