How to solve the failure of Win10 computer booting blue screen code is 0x000000d1

The Win10 system computer has a blue screen when it is turned on, indicating the error code 0x000000d1. The reason why the blue screen of code 0x000000d1 is hardware aging and system conflict are two, so the solution method should be divided into two directions. The following describes how to solve the failure of Win10 booting blue screen blue screen code 0x000000d1.

First, the cause analysis

1, the memory is not high quality or bad contact or aging.

2, the hardware driver does not match or is damaged.

3, the system was damaged by viruses Some hardware configuration files were changed.

4, there are several software conflicts.

If this problem occurs during use and there is no software or driver installed, check the memory. Usually caused by a problematic driver, defective memory, corrupted virtual memory files, certain software such as multimedia software, anti-virus software, backup software, DVD playback software, etc. can also cause this error.

Second, hardware failure causes blue screen solution

1. Set the BIOS to the default value.

2. Check all connections and remove dust from the host.

3, check the heat.

4, test the memory for problems, clean the slot, and then plug.

5, reset the virtual memory, set the virtual memory in a partition other than the C disk with a larger space.

6, if you encounter this blue screen while surfing the Internet, and you are doing a lot of data download and upload (such as: online games, BT download), then it should be the problem of network card driver, replace the network card driver Or change the network card.

7. Check the latest installed or upgraded drivers. If a similar file name appears in the blue screen, etc., you can be very sure about the driver problem, uninstall this driver, re- Install the appropriate driver.

8, replace the graphics card, sound card driver

9, uninstall, replace the suspected software in the machine, especially kill software. Replace the game software version.

10. It is also possible that the hardware or its drivers are not compatible with the power management of Windows.

(1) If there is APM (Advanced Power Management) settings in the “Control Panel/Power Options”, turn off the APM function. At the same time, disable sleep in “hibernate”.

(2) Set the power management option "ACPI Suspend Type" in the BIOS to S1 (some machines display as STR) or directly disable the ACPI option.

11. Reinstall the system. Previous12Next page Total 2 pages