Win10 SSD speed optimization SSD speed Win10 optimized SSD method

Compared to Win7/Win8, Win10 support for new hardware such as solid hard disk, but in daily use, there is still room for optimization. . So, how to optimize Win10 SSD? Today, the computer Pepsi network Xiaobian came to Win10 system, share the SSD optimization method, SSD users must see!

Win10 solid state hard disk how to optimize SSD speed Win10 optimized solid state hard disk method

Win10 solid state hard disk optimization one: keep disk defragmentation open

mechanical hard disk era, we optimize hard disk Mainly defragmentation. However, in the SSD era, SSDs do not need to be cleaned up because they do not have "fragments" themselves. However, it should be noted here that the SSD will also have a slowdown, mainly because there is too little free space or the master does not perform garbage collection in time, and Trim optimization needs to be performed.

In the Win10 system, when the disk defragmentation is enabled, the mechanical hard disk and the solid state hard disk will be automatically detected. The former will perform defragmentation, and the SSD will execute the manual Trim. In this regard, Win10 has already implemented intelligent detection. Therefore, for Win10 users, it is recommended to enable the defragmentation function.

Win10 SSD disk defragmentation optimization method:

1, open this computer (my computer), click the right mouse button on the SSD system disk, and then hit open "ldall" attribute, rdquo;, as the picture shows.

2. After opening the local disk property interface, switch to the “Tools” tab and click “Optimize” as shown.

3, then in the optimized driver interface, you can choose to manually optimize the disk, or you can turn on “automatic optimization" as shown.

Win10 SSD Optimization II: Turn off Superfetch Service

The Superfetch service is a file pre-access mechanism in Windows that can be opened in advance by the user. The program is pre-read to improve the opening speed of daily programs. But in fact, because the speed of SSD is already fast, the acceleration effect produced by Superfetch seems to be very weak now. On the contrary, the frequent reading and writing caused by this has a considerable impact on the life of SSD particles. Therefore, in the era of Win10, SSD users can safely shut down Superfetch to protect the life of SSD itself.

Turn off the Superfetch service method: Click the Win10 taskbar search box, enter “service” enter the local service list, find and double-click "Superfetch", and change the attribute to "disable" after Restart your computer.

Win10 SSD optimization three: turn off DIPM energy-saving features

For the need of energy saving, Intel and AMD have proposed their own energy-saving solutions, such as Intel's DIPM energy-saving mechanism. This mechanism is designed to automatically instruct the SSD to enter a low-power, power-saving state when the system is idle. But in fact, due to the wide variety of system platforms, the probability of compatibility problems in DIPM is much greater than its original role. The specific performance is that the system does not time the card machine, and then returns to normal after 1~2 minutes.

In general, turning off DIPM can be done with the help of Intel SSD Toolbox or SSD vendor's own management program. If not, you can directly enter the BIOS to find related options.

Win10 SSD Optimization 4: Turn off Windows Search

Like Superfetch, as Microsoft SSD speeds increase, another Microsoft service ——Windows Search (Windows Search) is also lost The aura of the past. According to the author's experiment, after shutting down Windows Search, the system running speed and search speed did not appear to be significantly slower, basically the same as when it was turned on. Similarly, Windows Search will also cause frequent hard disk reads, so our choice is —— turn it off!

Turn off the Windows Search service

Close the method: Click on the Cortana search box, type "Services" to enter the local service list, find and double-click "Windows Search" to change its properties to “Disable”. Next, open “this computer”, right-click on the disk properties, cancel “ in addition to the file properties, also allow to index the contents of the file on this drive & rdquo; in front of the check box (each partition must do! ).

Win10 SSD Optimization 5: Shut down and shut down the system

With the continuous increase of Win10 boot speed, few people are using the system hibernation service. .

In a nutshell, this is a user environment save mechanism. When you hibernate, the computer saves the currently open programs and documents to the hard disk (memory image file), and then restores the environment at the next boot. But in fact, the chances of using this feature on a daily basis are small, because most users will choose a faster, easier-to-use "sleep" function (STR). And its problem is still, even if the sleep function has not been used, STD will generate a huge image file on the hard disk, which is not suitable for SSDs where the space is not sufficient. So when you feel that the SSD space is tight, try to turn off the hibernation service, and often save a lot of space.

Hibernate files tend to take up a lot of space

Turn off the system hibernation method: Click on the Cortana search box, type "CMD", right click on "Command Prompt" to execute “ Run as administrator, enter the command <;powercfg -h off”, if there is no error, it means it has been closed. After restarting the system, the huge image file disappears.

Delete Hibernation Files by Command

Win10 SSD Optimization Six: Turn off System Protection

As with hibernation, system protection is also a feature rarely used on a daily basis. Its biggest function is to quickly restore the normal working state when there is a problem with a certain driver. However, as you can think of, the system protection takes up space, and it also needs to continuously read and write to the hard disk. The most important thing is that the chance of using it is not big, so you can also close it.

Turn off Win10 system protection

The specific method is to right click on the desktop <;this computer"→“property"→“system protection"" "configuration” → “ disable system protection & rdquo;, then set the disk space usage to “0”

Editor:

Do not know, the original Win10 optimized SSD also has so many skills, and this is only for the optimization of the Win10 system level, is it that the SSD is also very instant Have you learned? For more SSD optimizations, please see the related extensions below.