Win7 BIOS reset factory settings two methods

a user because of work needs, enter the computer's BIOS and make some settings, but because of improper operation error. The best way we can think of at this point is to restore the BIOS to the original factory settings. The following small series will take the Win7 system as an example to introduce to you two ways to restore the factory settings of the BIOS.
Method 1,
1, remove the button battery on the motherboard, remove more than 15 banknotes after removal, and then install it, so you can eliminate the BIOS information, and then restore the factory settings.
2, of course, some motherboards are also equipped with "hard jumper", just need to use the jumper cap to short the "ld"; 2 & rdquo; and “ 3 & rdquo; pin, this can also be eliminated BIOS information function.
Method 2,
1. When booting up, when the message appears at the bottom of the screen, such as “Press DEl Enter Bios”, “Press F1 to Run Setup”, press DELETE to enter the BIOS. Program interface.
2, after entering the BIOS interface, move the cursor to the "Load Optimized Default" item, then press Enter.

3, then select “yes” in the pop-up window and press the Enter key to restore the factory settings, and finally press F10 to save it.

The above is a small list of ways to restore the BIOS to the factory settings. Friends who have the same problems can choose a method to solve. If friends and friends have other simpler methods, welcome to interact with Xiaobian.